|
New member Username: Cougar2Chatham, Ontario Canada Post Number: 1 Registered: Nov-07 | I need to have a wiring diagram for an Alpine model# 7904 CD player. My amp needs a switchable line and the only one is for power ANT. Will this work for both the antenna and the switch for the amp? I am hoping to use the RCA cable lines but it would be nice to know what the other lines are for. The colors of the other wires are, Pink/white stripe, broun/white stripe, grey/white stripe. There is a blue/white stripe and is labled "Dimmer control" How does this hook up? Then the standard wires are, Yellow, I think constant 12V Black, ground Red, 12V switched from key Any help on this would be great, Thanks, Dennis |
|
Silver Member Username: Kpa2727Post Number: 695 Registered: May-07 | with alpines, i never owned one i believe the ant is a rem wire. if that's the case when the key is off u should see nothing. when it's on it should see 12 volts. if that's the case yes u can turn as many amps as u like on and off with it. as far as lines go thier not for a amp output typically. any other infon needed u can find here just enter ur model not number but model. http://www.alpine-usa.com/US-en/support/ |
|
Silver Member Username: Kpa2727Post Number: 696 Registered: May-07 | with alpines, i never owned one i believe the ant is a rem wire. if that's the case when the key is off u should see nothing. when it's on it should see 12 volts. if that's the case yes u can turn as many amps as u like on and off with it. as far as lines go thier not for a amp output typically. any other infon needed u can find here just enter ur model not number but model. http://www.alpine-usa.com/US-en/support/ |