Mounting amp

 

Silver Member
Username: Quirky

SA, Texas

Post Number: 153
Registered: Feb-07
I don't have much space in the back of my car and need a place for my amp. my two locations are either mounted on the box or under the box (down-fire). I've been told the vibration can damage my amp if mounted on the box directly.

Is there a way i can prevent vibration to the amp by mounting something between the amp and the box?

Thanks,
Ben
 

Gold Member
Username: Andrew571

Stillwater/Edmond, Oklahoma USA

Post Number: 1225
Registered: Oct-05
rubber washers...MDF...foam material, anything that will logically absorb vibrations before reaching the amp.
 

Silver Member
Username: Quirky

SA, Texas

Post Number: 154
Registered: Feb-07
k, thanks Andrew.
 

Gold Member
Username: Nd4spd18

Northwest PA

Post Number: 3365
Registered: Jul-06
Where you mount it makes a difference also.


Go to this page and scroll down to the middle:

http://www.bcae1.com/amplfier.htm
 

Silver Member
Username: B3n07

Louisville, Ky USA

Post Number: 408
Registered: Jul-07
if you dont have to much room in trunk dont you have the back of your seats mount your amps there
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us