What cud be wrong

 

Bronze Member
Username: Maddoggvup

Omaha, NE

Post Number: 14
Registered: Sep-07
put in new HU same as last one and now my amp keeps going on protect what do u think it cud be
 

Platinum Member
Username: Wingmanalive

A pic is worth 1000 posts!!

Post Number: 10496
Registered: Jun-06
Bad wiring, bad ground, short somewhere. Many possibilities.
 

Bronze Member
Username: Maddoggvup

Omaha, NE

Post Number: 15
Registered: Sep-07
same wiring unplug old. plugin new one.i dont think it wud be HU wiring. what else cud it be
 

Silver Member
Username: B3n07

Louisville, Ky USA

Post Number: 388
Registered: Jul-07
ia your ohm load matched for the amp and subs????
 

Silver Member
Username: Jtown

ATX, Texas

Post Number: 477
Registered: Mar-07
it's prob the remote wire grounding out or just a poor ground for the amp. is there paint where you grounded the amp or bare metal?
 

Bronze Member
Username: Maddoggvup

Omaha, NE

Post Number: 16
Registered: Sep-07
omh is right. it mite be the remote. there waz paint sanded it off now bare metal
 

Bronze Member
Username: Maddoggvup

Omaha, NE

Post Number: 17
Registered: Sep-07
it duz it win i tern it up never did it befor
 

Gold Member
Username: The_image_dynamic

San Diego

Post Number: 2920
Registered: Dec-06
Your spelling could be slightly wrong.

Ghetto grammar is rarely cute unless you are in fact a ghetto thug who can shoot everyone who determines that you are ignorant. But you're probably not, so stay in school.

Translation: Youz spelling is wack yo, stay in skool dawg to keep it realz and shit. Wurd.
 

Silver Member
Username: Greeney1888

Clover GroveIm rich btch...

Post Number: 406
Registered: Feb-06
haha brad. ghettos in omaha? ...naw
 

Silver Member
Username: Jtown

ATX, Texas

Post Number: 481
Registered: Mar-07
clipping?
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5259
Registered: Jul-06
It could be that you lack the intelligence to properly set up your system.You should probably pay a professional to install your system because you aren't showing many signs of intelligence based upon your posts.Check the wiring on your subwoofer.Disconnect the subwoofer from your amplifier and if it's still in protect then your amp is fucked.
 

Silver Member
Username: Jtown

ATX, Texas

Post Number: 482
Registered: Mar-07
that was a lil uncalled for...
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5265
Registered: Jul-06
"that was a lil uncalled for..."

Not really.If he wants help he should probably try to post so it's legible.Feed your amplifier a signal through an ipod using a Y cable from a headphone jack to RCAs.Feed that into the amplifier and see if your amplifier is still in protect,most likely it will be.Does your amplifier go into protect as soon as you turn it on or is it going into protect after playing for a bit?You may be going into the thermal protection for whatever reason.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us