Charging a cap

 

d
Unregistered guest
I lost the directions to my punch capacitor. Just wanted to know how to charge it.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 3214
Registered: Dec-03
screw the charging card to the terminals and connect it to a 12V power source till the LED comes on. usually takes a minute or so.
 

New member
Username: Kragan

Post Number: 10
Registered: May-04
On the charging card you should have a green light and a red light. When you screw the card into the capacitor and connect the card to a power source the green light will come on right away. You leave it conneced until the green light goes out. It will never fully go out, but become very dim.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 3248
Registered: Dec-03
ehh there ya go.
depends on the card you're using, but yeah Kyle's directions fit the ones with Lightning caps.

it's not too hard to figure out once ya see the card, just be SURE you get the polarity right, or you could easily blow off a hand.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us