Ok, i have two dual voice coil 4 ohm subs that can be wired to 2 or 8 ohms. I am running then off a mono amp that has two sets of connectors for easy wiring. I would i wire both of the subs to two ohm and run one to each connector (not sure what that would put on the amp), or would i wire them together in parallel and put a 1 ohm load on the amp?
wait never mind, answered my own question becuase wiring then in 2 ohm then going one to each connector is the same as running them in parallel. so either way im going 1 ohm on the amp which is good. Thanks to me
