Safe RPM's with choke cable from local auto part store

 

Silver Member
Username: Mesodumm

Tri-City, Az Usa

Post Number: 173
Registered: Apr-07
I had a question the other day about how to get the car to idle higher when they played music at comps, I have always found that the easiest way was to get a choke cable from NAPA or any local parts store and run it to the throttle of your car. You just have to make sure it will NOT interfere with your regular use of it, I will drill a hole in a nut, tap the linkage plate and run the cable through the hole and put a cable lock on end, cars and trucks are differant you just have to look and see what the best and safest way to do it is. If you need help just ask! Thanks
 

Silver Member
Username: Mixmastaspig

Canada, Canada Canada

Post Number: 969
Registered: Sep-05
Mine is a arm and there is no screw you can adjust to make it rev higher, what should I look into?

I was wondering how to do it better as I just cram cardboard under the arm so it stays raised.....he||s yeah!
 

Silver Member
Username: Mesodumm

Tri-City, Az Usa

Post Number: 176
Registered: Apr-07
Hey Mike, do you have a camera or camera phone? snap me a pic and post it. and I will show you what needs done. Thanks
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us