|
Silver Member Username: KickermanPost Number: 181 Registered: May-06 | ok so i have a 240/125 idle ho alternator. i have 2 15" Fi Q's d2. i have a kicker 350.4 hooked up and 2 kicker kx 1200.1's. i have the amps strapped so there seeing a load of 2 ohms. now my gain is set at 30 out of 40. i can turn it up to 25 and anything over that the bass amps start to cut out. and cut right back on. then off again etc can any1 help me |
|
Gold Member Username: Logan__tilleTeam Revolution Post Number: 8599 Registered: Feb-06 | Your clipping them. Your gain is set way too high. |
|
Silver Member Username: KickermanPost Number: 182 Registered: May-06 | i set the gain with the voltage calculator it says to set it at 69.3. or do i just turn it down |
|
Gold Member Username: Logan__tilleTeam Revolution Post Number: 8600 Registered: Feb-06 | Whats the preout voltage on your HU? |
|
Silver Member Username: KickermanPost Number: 183 Registered: May-06 | its a pioneer avic d3 2.2v |
|
Gold Member Username: Logan__tilleTeam Revolution Post Number: 8602 Registered: Feb-06 | So set the gain at 22? |
|
Silver Member Username: KickermanPost Number: 184 Registered: May-06 | 22 ok explain to me exactly y its 22. from what i read to set the gain i just go to subwoofertools.com put in 2400 into 2 ohms and set the gain. it comes out to 69.3 how did u get 22 |
|
Gold Member Username: Logan__tilleTeam Revolution Post Number: 8603 Registered: Feb-06 | I thought you were supposed to set it to the HU preout voltage. |
|
Silver Member Username: KickermanPost Number: 185 Registered: May-06 | im asking not telling http://subwoofertools.com/forum/setgain.asp |
|
Silver Member Username: KickermanPost Number: 186 Registered: May-06 | bump so its 22 |
|
Silver Member Username: KickermanPost Number: 187 Registered: May-06 | bump b4 i go |
|
Gold Member Username: Logan__tilleTeam Revolution Post Number: 8604 Registered: Feb-06 | I would try 22. I dont think you will have any problems with it. |