Mach 5's newest driver is the SPL 12
|
Silver Member Username: Dakangofkrunk16Post Number: 780 Registered: May-07 | http://www.soundsolutionsaudio.com/forum/index.php?s=02f103eb30cb9dedbad357a4892 45632&showtopic=9942 |
|
Gold Member Username: OglejustPost Number: 2374 Registered: Aug-06 | nice find... keep doing this and ur gonna be welcome here |
|
Silver Member Username: Dakangofkrunk16Post Number: 782 Registered: May-07 | bumpin 4 somthing good |
|
Silver Member Username: Dakangofkrunk16Post Number: 786 Registered: May-07 | bump............then sleep |
|
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 369 Registered: Nov-06 | I personally compete with an older prototype and I am very happy with it. This monster can take some serious power, more then I have at the moment that is for sure. Many people did not think that this driver was going to make it, but Mark listened to the people and pushed forward with it. Thiele-Small parameters: Fs = 36.60 Hz Re = 3.60 ohms[dc] Qt = 0.32 Qes = 0.35 Qms = 3.65 Mms = 271.25 grams Rms = 17.083555 kg/s Cms = 0.000070 m/N Vas = 19.38 liters Sd= 444.88 cm^2 Bl = 25.199953 Tm ETA = 0.26 % Lp(2.83V/1m) = 89.69 dB rms; 2,500 watts   |
|
Gold Member Username: 54danny54KY More Wang Th... Post Number: 3941 Registered: Nov-04 | ohh my gahhh that is one hot azz sub |
|
Gold Member Username: Extrmndor3IF U HEAR ME... crazydbs.com Post Number: 6118 Registered: Feb-06 | yeah hot definetely but do they had to copy the mt????? cuz it looks like the mt with steroids |
|
Silver Member Username: ShowridesHartford, CT USA Post Number: 941 Registered: Feb-06 | Price? |
|
Gold Member Username: CtmikeCt. Post Number: 4810 Registered: Feb-06 | $210 plus shipping for preorder if i remember correctly. |
|
Silver Member Username: ShowridesHartford, CT USA Post Number: 942 Registered: Feb-06 | Alright, Thanks. |
|
Gold Member Username: Adam_sPost Number: 1668 Registered: Aug-04 | That is cheap for a sub that can handle that amount of power. |
|
Gold Member Username: Th3pwn3rPost Number:... Post Number: 3674 Registered: Jul-06 | Shipping from Canada will r-a-p-e people. |
|
Bronze Member Username: MrogowskiPost Number: 66 Registered: May-07 | Depends on where you're located... |
|
Gold Member Username: 04redmach1Columbus, GA USA Post Number: 1081 Registered: Mar-06 | I know where the mach subs are built and what is used to build them  Kevin |
|
Gold Member Username: CtmikeCt. Post Number: 4826 Registered: Feb-06 | do tell then^. |
|
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 375 Registered: Nov-06 | The big secret is China, and many of the same parts other companies use. No way in the world to get that sub built in the US for this price. |
|
Gold Member Username: BasssquaredKansas Post Number: 1012 Registered: Nov-06 | same as the new HD3 i forgot how it goes is it HDC3 or HD3C |
|
Gold Member Username: 04redmach1Columbus, GA USA Post Number: 1091 Registered: Mar-06 | Yep, same place as the HDC3. Also, the spyder isn't going to take a beating for a long time and not sag. If you change subs every 3 months, good sub, if you plan on keeping for a while, well have fun Also, the magnets are generic chinese magnets that are pretty cheap. We spoke with the plant that builds them. Kinda a generic sub all around. Only reason triple stacked is because the "americans" like that look. Kevin |
|
Gold Member Username: Trey4sportsPost Number: 1475 Registered: Sep-06 | ive also heard that triple-stack chinese slugs dont neccessarily generate more motor strength but more of a cosmetic add-on especially when compared to a double stacked american motor with bumped backplate. who knows if its true, just stating that ive heard similar things |
|
Gold Member Username: 04redmach1Columbus, GA USA Post Number: 1095 Registered: Mar-06 | Trey is right on Kevin |
|
Bronze Member Username: MrogowskiPost Number: 68 Registered: May-07 |  |
|
Gold Member Username: Denali_on_22sIm just light up my...... Post Number: 2473 Registered: Feb-06 | kevin you saw where bashing another company got you in a little hot water a while back so whyd ont you find your way out of this thread... |
|
Gold Member Username: JohnfiacA-ToWn, 9515 thumpin... What u bumpin? Post Number: 3339 Registered: Mar-06 | looks nice but please dont tell me those are spring loaded push terminals on that sub.... 2500rms going threw those would suck IMO, my friend just melted one of his spring loaded terminals right threw the plastic mounting in the box from to much power threw it.. 8ga. speaker wire on my friends sub so i kno the wire was good enough. BTW what would you expect from a budget sub under 200$ that does 2500rms.....Expensive american parts? compare it to a sub of similiar price and specs... your not going to find much better at the price. |
|
Bronze Member Username: MrogowskiPost Number: 69 Registered: May-07 | Nope, they are not spring loaded. |
|
Gold Member Username: Th3pwn3rPost Number:... Post Number: 3731 Registered: Jul-06 | "Depends on where you're located..." How much is shipping to 60415 mrgowski?You work for SSA right?Or are you one of their forum members or both? |
|
Gold Member Username: CtmikeCt. Post Number: 4831 Registered: Feb-06 | to give an idea of cost, shipping to ct. was $85, so $295 during the preorder for me. going to order one in the next week or so |
|
Bronze Member Username: MrogowskiPost Number: 70 Registered: May-07 | PM sent Rob. To answer your other question, no I do not work for SSA. SSA provides me with a forum and they sell a few of the Mach 5 Audio products through their site. Best, Mark |
|
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 377 Registered: Nov-06 | Man, think of all the free beer I could score if Mark was working for us. |
|
Gold Member Username: Th3pwn3rPost Number:... Post Number: 3734 Registered: Jul-06 | I think you can't drink that much.Wanna prove me wrong?Come down to Chicago and show me. |
|
Gold Member Username: 04redmach1Columbus, GA USA Post Number: 1097 Registered: Mar-06 | Reece, I wasn't the one bashing a while back. Not bashing now either. Just speaking the facts. Kevin |
|
Gold Member Username: JohnfiacA-ToWn, 9515 thumpin... What u bumpin? Post Number: 3343 Registered: Mar-06 | beeeeeeeer ill out drink u rob ;) Not spring loaded, so they are screw down terminals? |
|
Bronze Member Username: MrogowskiPost Number: 71 Registered: May-07 | Yes, they are screw down terminals. Decent quality ones too. |
|
Gold Member Username: Th3pwn3rPost Number:... Post Number: 3736 Registered: Jul-06 | "beeeeeeeer ill out drink u rob ;) Not spring loaded, so they are screw down terminals?" Rofl.Bring it homie.But let's do it with Vodka.Meet me at Bourbon St.Then after you get too drunk my steroid abusing cousin who's a bouncer there will toss your punk a ss out rofl.Just kiddin Killa,I never said I could drink much lol.10 beers I'm feelin good 10 shots feelin better and after that I wake up feelin s hitty I wish I got drunk off of 5,it's cheaper that way and less calories as far as beer goes. |
|
Platinum Member Username: BestmankindSQ = SoundSplinter RL-s Post Number: 14280 Registered: Oct-05 | my btl's were spring loaded and never had any problems. |
|
Gold Member Username: Th3pwn3rPost Number:... Post Number: 3738 Registered: Jul-06 | Chad did you pick up that thang? |
|
Bronze Member Username: MrogowskiPost Number: 73 Registered: May-07 | "my btl's were spring loaded and never had any problems." Some folks have their preferences I guess. |
|
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 378 Registered: Nov-06 | Mark when I order one for my personal collection, can you slap on a 4th cosmetic magnet for me?  |
|
Silver Member Username: Fi_car_audioHades, NV Post Number: 210 Registered: Sep-06 | Find me a US manufacturer for those magnets (220mm) and Ill send you $5. |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2354 Registered: Nov-04 | now is that the production model or a prototype pic? just wondering if the backplate was gonna be vented? |
|
Gold Member Username: Th3pwn3rPost Number:... Post Number: 3806 Registered: Jul-06 | "Find me a US manufacturer for those magnets (220mm) and Ill send you $5." Send me the 5 dollars and THEN I'll find you those magnets. |
|
Bronze Member Username: DevildriverPost Number: 45 Registered: Jun-06 | "just wondering if the backplate was gonna be vented?" I don't believe so, nor is there really a reason to do so. Mind you, if they switch to an american backplate, performance will clearly be much better. ;) |
|
Gold Member Username: Adam_sPost Number: 1713 Registered: Aug-04 | Is it only going to released in a 12" version or are there going to be more sizes available down the road?? |
|
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 383 Registered: Nov-06 | That is up to Mark and the popularity of the 12" first. |
|
Gold Member Username: Adam_sPost Number: 1714 Registered: Aug-04 | Is it possible for a 10" model to be made or is the magnet to big?? |
|
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 384 Registered: Nov-06 | The magnet size is not really the issue, the voice coils and suspension and market need is. |
|
Gold Member Username: Adam_sPost Number: 1716 Registered: Aug-04 | Ohhh I see. So then it is not possible? |
|
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 385 Registered: Nov-06 | That is for Mark to answer, he is in control of the future of the sub. On a side note, the market for 10" SPL focused subs is not that big. Now, many companies are selling just as many, if not more 18" subs then 10" subs. Much of that has to do with people wanting the wow factor and not caring about dbDrag restrictions based upon classes. |
|
Platinum Member Username: BestmankindITS ALL ABOUT THE RL-S Post Number: 14370 Registered: Oct-05 | " "my btl's were spring loaded and never had any problems." Some folks have their preferences I guess. i was referring to killa's statement above. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics