Im still waiting for my final box designs for the box i will put in my ride, but until then i want to still bump. I followed DD's directions and all and this is what i came up with. Using all 3\4" MDF with the demensions of 18"Deep 17"High and 38"Wide and 2 slot ports in the box, one on each side and the sub in center firing rear, i would get 4.186sq ft. after sub and port displacment leaving me with 67sq" of port at 15.5"high2.1"wide and 16"deep slots. That isnt much port area but its 16" per each sq. ft. Is there a difference from one port to 2 ports for one sub? or would i be better off with one bigger port.
How would this sound on 1.5-3Krms? the final box will have aero's so i can fit a bigger box... well rather more box volume...