2 10" Alpine Type-R subs and a Rockford 800a2 punch amp
David Pruitt
Posted on
What is the best way to wire this together for SQ sound? Subs are dual 4 ohm. Amp manual states that RMS bridged is 800 watts at 4 ohms. I don't know much about electronics, so please make explaination simple. thanks!
Anonymous
Posted on
wire each sub in a parallel. put one positive to the other neg on the back of each sub and then run the other pos and neg wire to one channel of the amp, do this same process with the other sub.
note- when u wire the pos to the neg on the back of each sub make sure u wire the pos to the neg of the other voice coil, don't wire the pos and neg of the same voice coil