|
Bronze Member Username: TycoonbobPost Number: 13 Registered: May-07 | Ok, I am upgrading my system and currently i have 2 alpine MRD-M605 amps. 600 rms each. And I am wanting to get get some type r's or type s's. But, this is the first time i would be dealing with dual coils so i dont really know what im doing. With 600rms amps, type s's are 300 rms and type r's are 500rms. But my question is, which is the better way to do it? 2ohm dual coils or 4 ohm dual coils, with the amps i have. and should i wire in parallel or series with the coils? help please. |
|
Silver Member Username: HgihkcinLincoln, NE Post Number: 196 Registered: Sep-05 | if you are hooking a single type r to one amp get the dual 4's and wire them in parallel, if you get two type s's get the dual 2 coil's and run each sub's coils in a series, then run the subs in parallel |
|
Bronze Member Username: TycoonbobPost Number: 16 Registered: May-07 | well im thinking about getting the type s and hooking them to one of the amps...and selling the other amp. if i was to get two 10 inch type s, 300rms, should i get dual 2 or dual 4 ohm coils? and wire them how |
|
Silver Member Username: HgihkcinLincoln, NE Post Number: 198 Registered: Sep-05 | if you get two of the type s, then get the dual two coils. http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qt y=2&woofer_imp=3 wiring option two |