Port noise?

 

Silver Member
Username: Smoke05

Tucson, Arizona U.S.

Post Number: 381
Registered: Jan-07
i really dont want port noise, but i have no other choice that i can think of, i cant do aereos, because i dont have space in my trunk for them, also the box is pretty much done, 29w x 14h x 14d, i havent installed the woofer in it yet, and i havent put the mdf piece (the one were the dub will be drill on) to the box.
i think i may use an elbow joint(for space saving) inside the box so i can put the port and maybe something to support the pvc?
i used the12volt.com port calculator and it said to use 11.33" of 4" diameter pvc tubbing.
the box is for a Fi Q powered by a zx1000.1
 

Gold Member
Username: Adam_s

15 TC9 Hybrid, RE MT Softparts

Post Number: 1031
Registered: Aug-04
I really think that one 4" pipe is not going to be enough port area for that Q I personally would do at least two.
 

Silver Member
Username: Smoke05

Tucson, Arizona U.S.

Post Number: 384
Registered: Jan-07
the thing is that if i do 2 i will need doble the lenght for each, that is right?
 

Gold Member
Username: Adam_s

15 TC9 Hybrid, RE MT Softparts

Post Number: 1033
Registered: Aug-04
It may not be double the length but I know it will be longer. You would just have to see what the calculator gives you for the length.
 

Silver Member
Username: Smoke05

Tucson, Arizona U.S.

Post Number: 385
Registered: Jan-07
BUMP anymore opinions?
 

Platinum Member
Username: Rovin

My 1 12 Atom...

Post Number: 11309
Registered: Jul-05
http://www.carstereo.com/help/Articles.cfm?id=31 ....
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us