Viper 690XV alarm problems

 

New member
Username: Th77

Post Number: 2
Registered: Apr-07
Hey everyone,

I have a 04 Infiniti G35 manual transmission with the Viper 690xv installed on it. The other day when I went to disarm it like I usually do, the remote beeps but doesn't disarm it. I go in the house and grab my other remote and same thing. The remote beeps and the lights flash twice and beeps like it always does but the alarm led light is still blinking and the alarm goes off when I use the key to unlock the door and enter. I didn't know about using the valet switch to disarm it so I unplugged the alarm brain. When I plugged it back in, I could arm and disarm the alarm just like before but now, my trunk won't open both from the remote and from the car trunk release button as well as the doors won't lock and unlock from the remote or from the car's lock/unlock switch. Lastly, the passenger side window won't roll up or down at all now. Is this a problem with the factory alarm? Any ideas? Thanks guys.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us