|
New member Username: Spyder22Post Number: 10 Registered: Mar-07 | I have an Elemental Designs NINe.2X powering two 12 in. Alpine Type E's. The links for each are below. AMP http://www.edesignaudio.com/edv2/product_info.php?t=2&products_id=47 SUBS (2) http://www.alpine-usa.com/US-en/products/product.php?model=SWE-1242&lang=en&tab= F Im not firmiliar with the controls on the amplifier, could somebody explain what they do and what i should set them to get a safe, stable, and good performing system. THE CONTROLS ARE LISTED BELOW */* means swich *-* means adjustment knob Control Type Of Control GAIN MIN-MAX BASS BOOST ON/OFF LPF 40Hz-240Hz X-OVER LPF/FULL/HPF HPF 40Hz-240Hz |
|
Bronze Member Username: MmaudioconceptsMurray, KY Post Number: 96 Registered: Jan-07 | put the x over on LOw the LPF at around 80hz bass boost off |
|
Bronze Member Username: Spyder22Post Number: 11 Registered: Mar-07 | The knobs dont have numbers. They do have six lines, 1 being min., 6 being max. Any idea where the knob should be as far as in between the 6 lines? |
|
Gold Member Username: N2audioLawrence, Ks USA Post Number: 1227 Registered: Mar-04 | with the LP ranging from 40-240 1/2 way should be 140hz, 1/4 should be 90hz, so somewhere just shy of 1/4. Gain is set relative to the voltage of your HU pre-amp outputs. That can be anywhere from ~2v to 5 or more depending on your HU. The range on that amp is from .150v to 7v. 1/2 way would be ~3.4v, 1/4 is ~1.6v. |
|
Bronze Member Username: Spyder22Post Number: 16 Registered: Mar-07 | Oh, i forgot about those other numbers that show the min. and the max. I guess the answer to my question was obvious. Thanks anyway. Sorry bout the noob question it was 3:30 am and my brain was kinda numb. |