AutoTek MM1400.1D

 

Silver Member
Username: 420alldaylong

Post Number: 906
Registered: Sep-06
I found this AutoTek MM1400.1D review check it out.

http://www.caraudiomag.com/testreports/0610_cae_autotek_1400_1d_amplifier/
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 4195
Registered: Dec-05
TEST RESULTS: AUTOTEK 1400.1D
--------------------------------------------------------------------------------

OUTPUT POWER @1% THD, 100Hz, 14.4 VOLTS Mono @ 4ohm 620 watts
Mono @ 2ohm 1074 watts
Mono @ 1ohm 772 watts


OUTPUT POWER @ 5% THD,100Hz, 14.4 VOLTS Mono @ 4ohm 698 watts
Mono @ 2ohm 1190 watts
Mono @ 1ohm 1750 watts


OUTPUT POWER @ 1% THD,100Hz, 14.4 VOLTS Mono @ 4ohm 480 watts
Mono @ 2ohm 820 watts
Mono @ 1ohm 704 watts
 

Silver Member
Username: 420alldaylong

Post Number: 911
Registered: Sep-06
Anybody have a AutoTek MM1400.1D
 

Gold Member
Username: N2audio

Lawrence, Ks USA

Post Number: 1220
Registered: Mar-04
what the hell happened at 1 ohm?? Charts look fine.

I won't go as far as to say it's a 1606, but it's not far off.
 

Gold Member
Username: N2audio

Lawrence, Ks USA

Post Number: 1221
Registered: Mar-04
oh, forget it. Just a butt-load of THD...weird
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 4199
Registered: Dec-05
very weird.. 5% is too much. At 1% didn't put the rated power.

IDK, info looks distorted or something like that... not saying that you changed it joey..
 

Silver Member
Username: 420alldaylong

Post Number: 913
Registered: Sep-06
Juliob

THEN WHAT ARE YOU SAYING
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 4206
Registered: Dec-05
cuz in a part, says that at 2ohms, the amp did more power than one ohm. Check it up there^^^^^

plus, 5% THD it's very high. IDK, i don't think autotek is making cr4ppy amps like that. IMO
 

Silver Member
Username: 420alldaylong

Post Number: 921
Registered: Sep-06
juliob

http://www.caraudiomag.com/

Then test reports 2nd page

And see for your self
 

Gold Member
Username: N2audio

Lawrence, Ks USA

Post Number: 1223
Registered: Mar-04
it produced plenty of power. It's just that the THD is 2x what is normal. An SQ person might consider it completely unusable at 1 ohm. An SPL user wouldn't give a care -- much like the guys CA throwing fits about my thoughts on this review.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us