My sub F'ed Up??? Popping clicking noise

 

Bronze Member
Username: Followyoursole

Post Number: 52
Registered: Sep-04
I just got a eclipse 12 inch sw7200 a week ago. It was hitting strong. But now It doesnt feel as strong. I have it in a port and was testing out polyfil, i put to much and it started clicking popping. I took out the sub and polyfil and seemed ok but still popping and clicking on what seems like low frequencies. it happens 1 time every 10-20 seconds on some songs. I thought it was the aluminum cone hitting a wire so i took the sub out again and nothing. Whats the clicking tapping sound comming from?

Could it be that i damaged soemthing? Or something mis alligned?
 

Gold Member
Username: Frkkevin

Resonant Engineering..., Fort Worth... Email

Post Number: 3172
Registered: Nov-05
look and see if the tinsel leads are slapping the cone
 

Bronze Member
Username: Followyoursole

Post Number: 53
Registered: Sep-04
the tinsel leads seem to be pretty flat layed, not dangling or anything like that. I should of bought a TC sounds sub instead of this eclipse.
 

Gold Member
Username: Frkkevin

Resonant Engineering..., Fort Worth... Email

Post Number: 3176
Registered: Nov-05
check the cone right above the tinsels for any wear marks.. also check the spider for wear marks.. if there is nothing you could have a bigger problem

push in the center of the cone.. is there a point where it scrapes? is it tight.. not as loose as it was?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us