Chad, Kebo, Mean...Anybody ~Help with wiring picture.~
|
Silver Member Username: BlazerboyPost Number: 236 Registered: Jun-06 | Could somebody please give me a diagram of how I will have to wire a 15" Fi SSD Dual 2 ohm sub, and a A8002v amp at 800x1, bridged. Thanks for your help, and last question about these subs wiring, I SWEAR! ;) |
|
Platinum Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 11383 Registered: Jul-05 | http://www.the12volt.com/caraudio/woofer_configurations.asp So Fu3king LAZY!! SH!T |
|
Silver Member Username: Sinful_systems70Post Number: 264 Registered: Nov-06 |   |
|
Silver Member Username: BlazerboyPost Number: 238 Registered: Jun-06 | Haha, I wish it was lazyness, I just dont know sh!t when it comes to wiring. Thanks guys. |
|
Silver Member Username: BlazerboyPost Number: 239 Registered: Jun-06 | OK so since my amp does 800x1 and teh sub is Dual two, what would I type in, it's not that im lazy, i just dont know what to put in. Or you can save yourself the trouble and just back up one of Sinful's pictures for me to go by. Thanks. |
|
Platinum Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 11391 Registered: Jul-05 | it does 800x1 at what ohm??? |
|
Silver Member Username: Sinful_systems70Post Number: 273 Registered: Nov-06 | If its bridged than is probably @ 4 ohms. |
|
Gold Member Username: JohnfiacIL Afghanistan,... Post Number: 1301 Registered: Mar-06 | its very simple for what your doing... take one of the voice coils negativs and connected it to the positive of the opposite coil, then you have + and - left, connect it to the amp bridged, + to + on amp, and - to - on amp(bridged mode of course) |
|
Gold Member Username: RvlacosDD 3512 United States Post Number: 1586 Registered: Sep-06 | to be or not to be... that is the question |
|
Silver Member Username: BlazerboyPost Number: 240 Registered: Jun-06 | It is 1x 800W RMS @ 4 Ohms, so hopefully that will help. Also, is bridged mode a setting on the amp? |
|
Silver Member Username: Sinful_systems70Post Number: 282 Registered: Nov-06 | NO. Bridged is using the + from one speaker channel and the - from the other speaker channel. That is bridged. I knew it was 800 x 1 @ 4 ohms eventhough I have never read or seen this amp before. Its just that usually A/B channel amps usually giv their bridged wattage at 4 ohms. |
|
Silver Member Username: Super_marioPost Number: 148 Registered: Mar-06 | Why with all the confusion here. He doesnt have to bridge it. He has an amp that does 400watts rms at 2ohms per channel... so all he has to do is connect each channel to each vc therefore he gets the 800watts total that he wants. He can also bridge it but he has to connect the vc's in series then bridge the amp. Same thing |
|
Silver Member Username: Sinful_systems70Post Number: 288 Registered: Nov-06 | I was answering his questions, thats all. |
|
Silver Member Username: Freezeman_7SSDs, OK U.S.A Post Number: 672 Registered: May-06 | connecting those, doesnt always put out the ohms you want, idk what the ohms are of his speakers, but im jus saying for future reference |
|
Silver Member Username: BlazerboyPost Number: 241 Registered: Jun-06 | I want to put out the 800 RMS, it can also do 200 at 4 and 400 at two. Im still kinda confused, a diagram would be best, im new and learn best with pictures. |
|
Gold Member Username: JohnfiacIL Afghanistan,... Post Number: 1310 Registered: Mar-06 | your sub is DVC 2ohm if i remember right from the other thread, connect the negative from one of the voice coils to the positive of the other voicecoil, the sub is now 4 ohm. To run the amp bridged most likly the amp will have some sort of line sorta pointing at the + and - terminal on the amp with the word bridged in it. The terminals the line ends at are the 2 terminals your want.. connect + from the speaker to + and negative from the sub to negative on the amp... |
|
Silver Member Username: BlazerboyPost Number: 243 Registered: Jun-06 | Is there any site forthis kind of wiring so I can get a diagram? Thanks a ton guys. KO |
|
Silver Member Username: BlazerboyPost Number: 253 Registered: Jun-06 | Bump...Box picture please Thanks guy. KO |
|
Silver Member Username: BlazerboyPost Number: 254 Registered: Jun-06 | Not Box, Wiring******^^^ |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics