Bronze Member Username: Dddd
Fayettville,
Tennessee
Lincoln
Post Number: 25
Registered: Dec-06
|
Posted on CAN SOMEONE TELL ME THE BEST WAY TO WIRE THESE SUBS TO A CRUNCH 1000 WATT AMP |
Gold Member Username: 54danny54
KY
More Wang Th...
Post Number: 3393
Registered: Nov-04
|
Posted on WELL IT DEPENDS
WHAT IS THE OHM ON THE SUB AND SPECS OF THE AMP?
PS TAKE CAPS OFF |
Silver Member Username: Thumping_corsica
Mi,
Mi
Unitd states
Post Number: 336
Registered: Aug-06
|
Posted on is this amp a mono or 2 channel? Are the subs 4 ohm dvc's? Whats the rms of amp and sub |
Gold Member Username: Logan__tille
[:-]15 Wangers Club[:-] Premier Member
Post Number: 5301
Registered: Feb-06
|
Posted on I SEE DET YOUS FROM TENNEKEY |
Bronze Member Username: Dddd
Fayettville,
Tennessee
Lincoln
Post Number: 26
Registered: Dec-06
|
Posted on It is a 2 ch amp.The subs are dvc 4 ohm at 750 watt.The amp is 1000 watt so the rms should be about the same |
Gold Member Username: Logan__tille
[:-]15 Wangers Club[:-] Premier Member
Post Number: 5304
Registered: Feb-06
|
Posted on Whats the amp rated at? |
Bronze Member Username: Dddd
Fayettville,
Tennessee
Lincoln
Post Number: 27
Registered: Dec-06
|
Posted on 1000 watts |
Gold Member Username: Logan__tille
[:-]15 Wangers Club[:-] Premier Member
Post Number: 5305
Registered: Feb-06
|
Posted on at 1 ohm? 2 ohm? |
Bronze Member Username: Dddd
Fayettville,
Tennessee
Lincoln
Post Number: 29
Registered: Dec-06
|
Posted on 2ohm |
Gold Member Username: Logan__tille
[:-]15 Wangers Club[:-] Premier Member
Post Number: 5307
Registered: Feb-06
|
Posted on bump |
Gold Member Username: Logan__tille
[:-]15 Wangers Club[:-] Premier Member
Post Number: 5308
Registered: Feb-06
|
Posted on Wire each sub to each channel like this...
 |
Bronze Member Username: Dddd
Fayettville,
Tennessee
Lincoln
Post Number: 31
Registered: Dec-06
|
Posted on ok,i had it like that,and it kicked into protection. |
Silver Member Username: Snarl2004
Post Number: 167
Registered: Dec-06
|
Posted on check all connections and make sure there secure and make sure its grounded to a good place where its metal to metal (no paint in between) |