Amp problems

 

Silver Member
Username: Rob932

Post Number: 106
Registered: Feb-05
alright my friend was trying to hook up a hifonics brutus and evertime he hooked it up it blew the fuse in the power wire. I told him some thing to try and find the problem but he couldn't. He took the amp apart and noticed there were burnt parts on the board. I now have the amp and it looks like 4 resistors are fried. Does anyone know where i can get a schematic? or if anyone has any ideas what is wrong or what happened to it would be helpful.
 

Silver Member
Username: Warlok

Orlando, FL USA

Post Number: 189
Registered: Dec-05
http://ampguts.realmofexcursion.com/

The best I can do from here, good luck. Give the manufacturers a calll, I doubt they will want to help you though.
 

Silver Member
Username: Qbenjamin

Florida

Post Number: 243
Registered: Nov-06
Hifonics will not want to deal with your amp unless you have a receipt from an authorized seller. They will tell you that you can send it in for repair, which will probably be about $100-$150.
 

Silver Member
Username: Warlok

Orlando, FL USA

Post Number: 191
Registered: Dec-05
Uhh, you could just try replacing the fried resistors. CAn you see the color code on them ? Or look at amp guts, if the pic is high enough resolution, you should be able to get it from there.
 

Silver Member
Username: Rob932

Post Number: 107
Registered: Feb-05
thats why i needed the schematic but i think i can tell what value they are
 

Silver Member
Username: Warlok

Orlando, FL USA

Post Number: 193
Registered: Dec-05
Measure them with an OHm meter , .. . . .. LoL, just kidding !
 

Silver Member
Username: Rob932

Post Number: 108
Registered: Feb-05
for some reason i think i just might not get the right value :-)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us