Autotek SX-2300

 

Bronze Member
Username: Ckelley

Post Number: 52
Registered: Jun-06
I've never heard autotek before but i have read posts about their amps before. I have a guy selling the sx2300 for $150.Is it worth it????? I know the reg. price is much higher.

Also how would work on my 2 Fi audio X 12's on a factory alt.( not sure about power consumption on these amps.)
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 3993
Registered: Dec-05
the model is very good. But let me tell you something. That's an A/B amp that will pull a lot of current from your alt. Amp's quality is very good and you might see 900w-1000w rms at 14.4V

If i were you, since you're using a factory alt, i'd grab a class D amp.

Are those subs dual 4 ohm or dual 2 ohm???????
 

Bronze Member
Username: Ckelley

Post Number: 53
Registered: Jun-06
the subs are dual 4 ohm. How about a Memphis 16-PRD500.1 and run them at 1 ohm?
 

Gold Member
Username: Logan__tille

[:-]15 Wangers Club[:-] Premier Member

Post Number: 4888
Registered: Feb-06
that would work
 

Bronze Member
Username: Ckelley

Post Number: 54
Registered: Jun-06
Would this be better and draw less current??

JBL GTO601.1 II
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 3994
Registered: Dec-05
if the subs are dual 4 ohm, you need 600w rms at 1 ohm. IDK if that jbl is one ohm stable
 

Bronze Member
Username: Ckelley

Post Number: 55
Registered: Jun-06
What would be a good amp for me?
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 3998
Registered: Dec-05
pg xenon 600.1
 

Bronze Member
Username: Ckelley

Post Number: 56
Registered: Jun-06
any other suggestions.
need 600 at 1 ohm
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us