Trying to see if anyone would know what ohm value to use on the parking light wire. My headlights flash with the parking lights and it's pretty annoying when the remote start is on.
I found a diagram for the relay and resistor on bulldodsecurity.com that shows how to tap into this circut. I chose to tap into the parking light circuts and add diodes instead on my 04 Ram. The door lock diagrams are also on the Bulldog sight. I put a Clifford 3.5 in my car and I have the 2004 Ram wiring diagrams for this harness. I put a 2004 Hemi and all the wiring from a Ram into my Javelin. My remote start works fine but the brake kill does not work properly. I will be adding a seperate pin switch for this function.