Where do you mount crossovers???

blaine westropp Gold Member Username: Blainew Alpine type S 6.5 inch... Post Number: 2060 Registered: Nov-05	Posted on Saturday, January 06, 2007 - 22:35 GMT shouldi mount them in the doors?? or in my trunk???
Marc Gold Member Username: Van_man Boston South, MA Post Number: 1647 Registered: Mar-06	Posted on Saturday, January 06, 2007 - 22:49 GMT As close to the speaker as feasible.
blaine westropp Gold Member Username: Blainew Alpine type S 6.5 inch... Post Number: 2061 Registered: Nov-05	Posted on Saturday, January 06, 2007 - 23:03 GMT shoild i put them in like a bag..in the door??? bc if i have to put them in the trunk..thats like a day process if i mount in the door, its fast, but what if they get wet.. they are not waterproof
¤Jack_ké££iñgoñ¤ Gold Member Username: Frkkevin Resonant Engineering..., Fort Worth... Email Post Number: 2394 Registered: Nov-05	Posted on Saturday, January 06, 2007 - 23:03 GMT Depends on what your looking for. If you want to be flashy, make a panel that houses all your equip in the back, but be aware of all the wire runs you'd have to do. Beheind the door panel if you can find a gap would be a good location, or even under the dash. But to avoid long runs of speaker wire mount them as close as you can.
blaine westropp Gold Member Username: Blainew Alpine type S 6.5 inch... Post Number: 2062 Registered: Nov-05	Posted on Sunday, January 07, 2007 - 00:15 GMT should i put them in a platic bag or somethin?
Chauncey Brown=Nworb Yecnuahc Platinum Member Username: Chaunb3400 Huntsville, Alabama U.S. Post Number: 10912 Registered: Jul-05	Posted on Sunday, January 07, 2007 - 00:18 GMT I have mine in the back
blaine westropp Gold Member Username: Blainew Alpine type S 6.5 inch... Post Number: 2063 Registered: Nov-05	Posted on Sunday, January 07, 2007 - 01:16 GMT i dnt wanna have to wire wires back there.... should i put them IN the door...or on the outside...they look sweet on the outside.. outside as in, in the car, but where you can see them
mat dope Gold Member Username: Adddisorder West palm, Florida Post Number: 2680 Registered: Jan-06	Posted on Sunday, January 07, 2007 - 02:04 GMT put them in the little door pocket thing. dont put them inside the doors they will probly get wet.
blaine westropp Gold Member Username: Blainew Alpine type S 6.5 inch... Post Number: 2064 Registered: Nov-05	Posted on Sunday, January 07, 2007 - 03:21 GMT so i shuould mount them on the surface of the door, rather than like behind them??? like put them where they are visible??
[...Rovin...] Platinum Member Username: Rovin 1 12 Premier... Post Number: 10331 Registered: Jul-05	Posted on Sunday, January 07, 2007 - 03:57 GMT find a space between the door surface & the upholstery - thats what i did with mine & no problemo ever since installed .....
Marc Gold Member Username: Van_man Boston South, MA Post Number: 1651 Registered: Mar-06	Posted on Sunday, January 07, 2007 - 04:09 GMT How bout the kick panel area, or velcro to under the dash near the door. The reason I think they should go near the speakers is that my comps only had about 3' whips with terminals on both ends for tweets, mid, to crossover, and the crossover to amp wire was like 8' with just terminals on one end. I mounted mine on the upholstery next to the door.. My comps are going in a overhead box over the doors. So the crossover is right next to it. And visable.
james caroll Silver Member Username: Mygame5982 Comp Vr H-TOWN, TEXAS US Post Number: 920 Registered: Jan-06	Posted on Sunday, January 07, 2007 - 07:19 GMT seem like you have your mind set on showing them off.. DO IT
¤Jack_ké££iñgoñ¤ Gold Member Username: Frkkevin Resonant Engineering..., Fort Worth... Email Post Number: 2446 Registered: Nov-05	Posted on Sunday, January 07, 2007 - 10:45 GMT cut out some holes in your doorpanel then and flush mount them.. problem solved

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us