Make Sealed box Ported


New member
Username: Malizeryan

Post Number: 4
Registered: Dec-06
Hey. I just got a 13w7 and a 1000/1 in a sealed prowedge jl box. Its really not as loud as i thought it would be. I think a ported box would be alot louder than this sealed one, but it costed me alot of money. Could i just drill out a 4" hole in the side and it would be technically ported? would this be a bad idea?

Gold Member
Username: Ctmike


Post Number: 2861
Registered: Feb-06
horrible idea.

Gold Member
Username: Bestmankind

Fi Audio BTL

Post Number: 8600
Registered: Oct-05
don't do that. besides you can't just drill a hole and be done with. you would have to stick a pipe in there. but really don't do that. build yourself a nice ported box.

Bronze Member
Username: Skibum12189

Post Number: 28
Registered: Mar-06
The Prowedge was built to be a sealed design. It's too small to port. It wouldn't be too difficult to build a basic ported box for a w7

Silver Member
Username: Trey4sports

Post Number: 223
Registered: Sep-06
i dont know the specs on the box but the easiest way to "port" the box would be a circular design. go to and buy a port from there its simple and there is a calculator on there to find out wat size port u need. also you just have to cut a small hole in ur box then screw the port in, quite simple. good luck

Gold Member
Username: Logan__tille

[:-]15 RE XXX[:-]

Post Number: 4291
Registered: Feb-06
Do not do that

Silver Member
Username: Mygame5982


Post Number: 944
Registered: Jan-06
yea i agree..dont be
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us