Like

Got a new car, Need new sustem 2

 

Silver Member
Username: Rideredder

Cornell, IL USA

Post Number: 650
Registered: Sep-05
Ok, I think I have it narrowed down to what I want, but I need a few more suggestions.

First off, I have finally decided to go with one Fi Q 12" dual 2Ohm in a slot ported box running off an RF T10001BD. I am thinking of using the Knukoncepts 1/0 gauge wiring kit(or could I go smaller?), an Optima yellow top battery, and an Excessive Amperage 200A alt(or could I go smaller?). I don't know how many amps my stock alt is.

Also, I know how the box should be, but I have never used a slot ported box before. I will probably be building one myself unless someone disagrees to these pre-fabs...

http://caraudiofactory.com/single-slot-ported-p-118.html

http://caraudiofactory.com/single-slot-ported-p-119.html

http://caraudiofactory.com/single-slot-ported-p-116.html
 

Gold Member
Username: Drsmith

Montana USA

Post Number: 2307
Registered: Nov-04
sounds wonderful
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 3789
Registered: Dec-05
nice system.
 

Platinum Member
Username: Rovin

1 12 Premier...

Post Number: 10224
Registered: Jul-05
i must admit those boxes look nicely made

BUT - whats it tuned to & what thickness of mdf is it made of ?......
 

Gold Member
Username: Bestmankind

Fi AudioBTL

Post Number: 8350
Registered: Oct-05
mark looks like you have made some fine choices.
 

Silver Member
Username: Rideredder

Cornell, IL USA

Post Number: 652
Registered: Sep-05
Rovin, The boxes are 3/4" thick. I was hoping someone here would know what they would be tuned to because I don't know how to calculate all that stuff yet.
 

Silver Member
Username: Andrew571

Stillwater/Edmond, Oklahoma USA

Post Number: 493
Registered: Oct-05
hey! thats my mini-system!
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 2543
Registered: Jan-06
iv got to warn you id stay away from EA. alot of people have been having trouble with his alts. either not charging at all. voltage regulators breaking, and not putting out any voltage at idle and all kinds of crap....

id go with iraggi its worth a little exrta money or see if you can get a mean green or ohio generator
 

Silver Member
Username: Rideredder

Cornell, IL USA

Post Number: 653
Registered: Sep-05
Thanks for the heads up mat. I'll look into those.
 

Gold Member
Username: Bestmankind

Fi AudioBTL

Post Number: 8380
Registered: Oct-05
if you can tell us the cuft of the box and the dimesions of the port, its easy to calculate the port tuning. most of the prefab boxes are tuned high though.
 

Gold Member
Username: Frkkevin

Resonant Engineering..., Fort Worth... Email

Post Number: 2238
Registered: Nov-05
might check out my amp for sale if your not set on the RF :-) .. i ran it on a stock 90A alt with no problems so it would save you the alt you were looking to get
 

Silver Member
Username: Rideredder

Cornell, IL USA

Post Number: 655
Registered: Sep-05
First one...

Air Volume 2.90 Cubic Feet Total
Port Volume .32 Cubic Feet
Material 3/4'' M.D.F
Dimensions 27.5" W x 15" BD x 15"TD x 15" H

Second one...

Air Volume 2.28 Cubic Feet Total
Port Volume .39 Cubic Feet
Material 3/4'' M.D.F
Dimensions 24" W x 15" BD x 15"TD x 14.5" H

Third one... The only one that shows the port dimensions

Air Volume 3.00 Cubic Feet Total
Port Volume 1.00 Cubic Feet
Material 3/4'' M.D.F
Port Size 6''x14''x22''
Dimensions 28.75" W x 16" BD x 16"TD x 15" H

And there is another one called a transmission line slot ported...

Air Volume 2.22 Cubic Feet Total
Port Volume .79 Cubic Feet
Material 3/4'' M.D.F
Dimensions 21.75" W x 20.5" BD x 16"TD x 13.5" H
 

Silver Member
Username: Rideredder

Cornell, IL USA

Post Number: 656
Registered: Sep-05
I know Kevin, I asked you about in my last thread but you didn't answer. How much you want for it?
 

Silver Member
Username: Rideredder

Cornell, IL USA

Post Number: 657
Registered: Sep-05
Bump.
 

Silver Member
Username: Rideredder

Cornell, IL USA

Post Number: 658
Registered: Sep-05
BUMP! Come on guys, help me out.
 

Gold Member
Username: Tdbdadrummer

Wellsburg, WV USA

Post Number: 1730
Registered: Aug-05
Transmission line enclosures are supposed to be pretty nice if done properly.
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us