Hey Rovin... (or anyone that knows)

 

Silver Member
Username: Shortysetnies

Rock Vegas, NC US

Post Number: 650
Registered: Mar-06
...Imma bother you with another Type R question. I am putting two r 12's in an explorer and Imma start designin/buildin the box this week and I was wonderin what you think the cu. ft (single chamber) and tunin should be. Thanks man.
 

Gold Member
Username: James1115

Ct

Post Number: 7666
Registered: Dec-04
1.75/sub tuned to 32hz
 

Gold Member
Username: Logan__tille

Post Number: 2973
Registered: Feb-06
What amp are you going to use?
 

Platinum Member
Username: Rovin

Trinidad & T...

Post Number: 10057
Registered: Jul-05
well when i did my 2 Rs in a single chamber box i used a 1.7cuft /sub & tuned 32hz - was really damn loud

i also experimented with doing same volume/tuning but each sub in its own space - was slightly less louder but had better SQ ......
 

Silver Member
Username: Shortysetnies

Rock Vegas, NC US

Post Number: 653
Registered: Mar-06
he's still lookin for an amp. Thanks guys
 

Silver Member
Username: Shortysetnies

Rock Vegas, NC US

Post Number: 676
Registered: Mar-06
Anyone on here that can design me a box (like rovin just described) before around 3:00 PM eastern time this afternoon? I would really appreciate it.
 

Silver Member
Username: Adam_s

Sound Splinter, RL-p 15 D4 2.7 Cuft @ 3...

Post Number: 390
Registered: Aug-04
give me some dimensions you are working with.
 

Silver Member
Username: Adam_s

Sound Splinter, RL-p 15 D4 2.7 Cuft @ 3...

Post Number: 391
Registered: Aug-04
And Rovin was that 1.7 cuft before or after sub displacement??
 

Silver Member
Username: Shortysetnies

Rock Vegas, NC US

Post Number: 677
Registered: Mar-06
cant be bigger than 41.5" wide, 17" tall, and 19" deep. Thanks man. I got BBP6 but it wont download...
 

Silver Member
Username: Adam_s

Sound Splinter, RL-p 15 D4 2.7 Cuft @ 3...

Post Number: 392
Registered: Aug-04
Here you go...this one should work out for you.

http://www.subwoofertools.com/forum/ported-box.asp?Ew=38&Eh=16&Dia=6&Xmax=14&Vd= .12&NumW=2&Vb=3.55&Fb=32&Qts=&Vas=&Fs=&CE=0
 

Silver Member
Username: Shortysetnies

Rock Vegas, NC US

Post Number: 678
Registered: Mar-06
thanks man.
 

Silver Member
Username: Adam_s

Sound Splinter, RL-p 15 D4 2.7 Cuft @ 3...

Post Number: 394
Registered: Aug-04
No problem.
 

Silver Member
Username: Shortysetnies

Rock Vegas, NC US

Post Number: 680
Registered: Mar-06
http://www.j designs.info/phpBB2/viewtopic.php?t=1025
Progress so far

(take the space between j and designs)
 

Silver Member
Username: Shortysetnies

Rock Vegas, NC US

Post Number: 683
Registered: Mar-06
bump.

Let me know what you guys think so far
 

Platinum Member
Username: Rovin

Trinidad & T...

Post Number: 10079
Registered: Jul-05
1.7 after

that box link above is fine except type R displacement is .084cuft .....
}
 

Platinum Member
Username: Rovin

Trinidad & T...

Post Number: 10080
Registered: Jul-05
i just posted in u thread on J forum .....
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us