|
New member Username: PaintrelieverPost Number: 1 Registered: Nov-06 | I have a Type R on its way. I have everything I need, except for a box. Not sure if this matters, but I have an amp that will put out 400 RMS at 4 ohms. Not sure if I would need a bigger box to help the sub or what, but oh well. I want this box to be ported. SO if anyone can help me out and give me demonsions, that would be perfect. |
|
Gold Member Username: SouthernrebelMonroe, Louisiana DD 9515d~~]... Post Number: 3785 Registered: Mar-04 | http://www.subwoofertools.com/forum/ported-box.asp?Ew=25.5&Eh=13.5&Dia=6&Xmax=15 &Vd=.12&NumW=1&Vb=2&Fb=35&Qts=&Vas=&Fs=&CE=0 there ya go. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 9728 Registered: Jul-05 | which model type R - the 1222 or 1242 ? ...... |
|
New member Username: PaintrelieverPost Number: 2 Registered: Nov-06 | 1242 |
|
Gold Member Username: RovinTrinidad & T... Post Number: 9729 Registered: Jul-05 | ok so thats the dual 4ohms model & whats ur amp model no ? since u can only wire that 1 sub @ 2 or 8ohms ...... http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html?subs =1&impedance=DVC4x2 |
|
New member Username: PaintrelieverPost Number: 3 Registered: Nov-06 | amp- Phoenix Gold R8.0:1 Octane-R 8.0:1 Class D MonoBlock Amplifier Im not going to be installing it, im going to a shop for that, but id figure id build the box or at least have demonsions for someone local to build it |
|
Gold Member Username: RovinTrinidad & T... Post Number: 9731 Registered: Jul-05 | well that link marshal gave u is good except he put the xmax as 15 when it should be 18.2mm - play around with the height/width to see what will fit ur car & use what u end up with ...... |
|
New member Username: PaintrelieverPost Number: 4 Registered: Nov-06 | alright, thanks guys What kind of material would I need to make this box happen? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 9732 Registered: Jul-05 | http://www.diysubwoofers.org/ .......... |
|
Silver Member Username: Dmm2005Digital Designs, Raleigh BWO ... USA Post Number: 157 Registered: Aug-06 | use 3/4 inch mdf with wood glue and screws to hold it in place...then use either liquid nails or silicone to seal it up |
|
New member Username: PaintrelieverPost Number: 6 Registered: Nov-06 | can someone build me a box for around 100 Shipped? |
|
Silver Member Username: J_baby15Kentucky Post Number: 775 Registered: Feb-06 | wheres it being shipped to? I may be able to. |
|
Silver Member Username: J_baby15Kentucky Post Number: 776 Registered: Feb-06 | u would prolly be better off buildin your own tho. It willsave you a lot of money. |
|
New member Username: PaintrelieverPost Number: 7 Registered: Nov-06 | I would, but I dont have the tools and I hardly trust myself,even If i were to buy or find someone with tools |