|
Silver Member Username: HighstonePost Number: 299 Registered: Mar-06 | ok can someone gimme a diagram for the box of this sub.. 10w3v2 the specs can be found in the link. thanks what kind will be good for this sub. ported or sealed? if ported i would like it to be 33hz http://mobile.jlaudio.com/products_subs.php?series_id=11 thanks |
|
Silver Member Username: J_baby15Kentucky Post Number: 767 Registered: Feb-06 | JL has a box diagram for that sub on their site. |
|
Silver Member Username: HighstonePost Number: 300 Registered: Mar-06 | do u know approximately how much money will i need to make the box? |
|
Silver Member Username: HighstonePost Number: 301 Registered: Mar-06 | how much wood would i need.. what kind of wood.. thanks |
|
Gold Member Username: FrkkevinResonant Engineering..., Fort Worth... Email Post Number: 1619 Registered: Nov-05 | 1 4x8 sheet of MDF.. aprox $22 give of take some taxes. |
|
Silver Member Username: HighstonePost Number: 302 Registered: Mar-06 | and where would i be able to get MDF ? would home depot have it? |
|
Silver Member Username: Bump05Hesperia, CA USA Post Number: 228 Registered: Aug-06 | yea get 3/4"mdf home depot will have it |
|
Silver Member Username: HighstonePost Number: 303 Registered: Mar-06 | ok.. i don't have any cutting devices.. will home depot and/or lowes cut it for me? if so .. is it free or do they charge.? if they charge.. do u know how much? thanks |
|
Silver Member Username: Bump05Hesperia, CA USA Post Number: 229 Registered: Aug-06 | They'll cut it for you, and its free of charge but i wouldnt recommend that cause they always seems to make the cuts un even... cut it and your own pace or find a friend who has some tools cause when u cut most your peices that are for instance 18.5 would be the heith for like 5 peices they all need to be cut at the same time for pefect only makes it nice and makes it easier on you,just take you time |
|
Gold Member Username: FrkkevinResonant Engineering..., Fort Worth... Email Post Number: 1623 Registered: Nov-05 | lowes will cut it for free.. never had them cut wood so who knows how straight the cuts would be.. depends on who was cutting it i suppose. you can pick up a skillsaw for cheap and get two clamps and a straight edge and cut it yourself |
|
Bronze Member Username: Fi_car_audioHades, NV Post Number: 40 Registered: Sep-06 | both have panel saws and the cuts are straight as can be... they are not "precision" cuts though so dont expect every panel to be the same down to a 1/64th of an inch... but thats what a little extra liquid nails is for and some sanding after the fact ;) If you have an extra $50 to kill... I second the purchasing of some tools to do it yourself. You can pick up a cheapy jigsaw for $20 at Walmart (although cutting long straight sections with a jigsaw does suck, using clamps and a straight edge will make it MUCH easier... just as cutting cirlces for the subs will suck with the skilsaw...lol) Thanks... Scott |