|
Silver Member Username: HighstonePost Number: 287 Registered: Mar-06 | hi everyone .. i have a audiobahn a6004t and 4 pioneer 6.5" and planning to get a small sub.. how would i wire all that to one amp. is it even possible.. Lets say the sub is 10W3v2-D4 http://mobile.jlaudio.com/products_subs.php?series_id=11 thanks |
|
Silver Member Username: HighstonePost Number: 288 Registered: Mar-06 | if u need any further info let me know... thanks |
|
Gold Member Username: Wolfman1966WEST MONROE , LOUISIANA USA Post Number: 1005 Registered: Jan-06 | would be better to get 2 amps, one 4 channel amp for the 6.5's and one mono amp for the sub. Also, just out of curiosity, where are you using the 6.5's? If you are putting them in the trunk with the sub, thats really just a waste. |
|
Silver Member Username: HighstonePost Number: 289 Registered: Mar-06 | no the 6.5s are in the doors.. not in the trunk.. but is it possibe to wire all that to one amp..? thanks.. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 9714 Registered: Jul-05 | if its just 1 pair of 6.5 & a single sub then any good 4chan amp will do use chan 1 & 2 on speakers & either bridge chan 3&4 or run run 3&4 on each coil of a dual coil sub ..... |
|
Gold Member Username: RovinTrinidad & T... Post Number: 9715 Registered: Jul-05 | if its just 1 pair of 6.5 & a single sub then a good 4chan amp will do provided that the wrms & ohms match up use chan 1 & 2 on speakers & either bridge chan 3&4 or run run 3&4 on each coil of a dual coil sub ..... |
|
Silver Member Username: HighstonePost Number: 290 Registered: Mar-06 | so u saying there is no way to put 4 6.5s and a sub to one 600 RMS amp...? |
|
Silver Member Username: HighstonePost Number: 291 Registered: Mar-06 | can't i put the + and - of the front speakers channel 1 channel and + and - of the rear speakers in channel 2 and bridge channel 3&4 for the sub? thanks |
|
Gold Member Username: BestmankindFi AudioBTL Post Number: 7021 Registered: Oct-05 | if your speakers are 4ohms, by doing that your amp will see a 2ohm load. as long as your amp can handle that then you are fine. |
|
Silver Member Username: HighstonePost Number: 292 Registered: Mar-06 | please help me ^^^ |
|
Gold Member Username: BestmankindFi AudioBTL Post Number: 7022 Registered: Oct-05 | if that was my setup, i'd just connect the front speakers and the sub to the amp. let the rear speakers run off the hu. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 9719 Registered: Jul-05 | agree with chad but if u still want to power all 4 speakers/1 sub & still have some tuning ability then buy a 5 chan amp ....... |
|
Silver Member Username: HighstonePost Number: 293 Registered: Mar-06 | ok.. my speakers are pioneer TS-D161R and their site say it's 4 ohm 2076_310069898_191756456_tab=B%2C00.html?compName=PNA_V3_ProductDetailsComponent #,http://www.pioneerelectronics.com/pna/v3/pg/product/details/0,,2076_310069898_ 191756456_tab=B,00.html?compName=PNA_V3_ProductDetailsComponent# so that should work right??? |
|
Silver Member Username: HighstonePost Number: 294 Registered: Mar-06 | thanks for the opinion rovin. but i want to stick to this amp.. audiobahn A6004t.. It's a 4 channel 600 RMS amp.. if that helps.. thanks |
|
Gold Member Username: BestmankindFi AudioBTL Post Number: 7024 Registered: Oct-05 | you can do that joe but i would advice you not to. trust me, just run the front speakers and the sub off the amp and the rear speakers off the hu. please. |
|
Silver Member Username: HighstonePost Number: 295 Registered: Mar-06 | what is the reasoning behind it.. not challenging ur intelligence in any way... just wanna know.. will the sound be different for the rear speakers if i do that.. ? thanks.. |
|
Gold Member Username: BestmankindFi AudioBTL Post Number: 7025 Registered: Oct-05 | i don't use rearfills in my car. to me i want the sound to come from the front. there are people who do like rearfills but i don't. it just sounds more natural from the front. besides you will have your sub back there. that is why i am saying it isn't necessary to amp your rear speakers. besides you will have better tuning ability like rovin said by doing what i told you. |
|
Silver Member Username: HighstonePost Number: 296 Registered: Mar-06 | i hope i'm not bothering u.. but if i put all 4 6.5" to the amp on channel 1 & 2 and bridge the sub to channel 3&4 ... is there any harm that i could do to anything... .. i mean both rovin and chad lee say that let the rear speakers run off fromt he HU..... thanks.. |
|
Gold Member Username: BestmankindFi AudioBTL Post Number: 7030 Registered: Oct-05 | no harm by doing what you say joe. and no bother. |
|
Silver Member Username: HighstonePost Number: 297 Registered: Mar-06 | thank you... i guess i got what i wanted to hear... lol.. one more thing... 2 + wires can go in a in 1 channel of the amp +.. right.. u get what i'm saying.. right.. |
|
Gold Member Username: BestmankindFi AudioBTL Post Number: 7031 Registered: Oct-05 | yeah i know what you are saying. yes they can. |
|
Silver Member Username: HighstonePost Number: 298 Registered: Mar-06 | THANK YOU! chad lee and rovin... very much.. |