Hahahahaha i just got done with doing a SPL test on my system and i was hitting 149.9db with my 2 Power Acoustic 12' Mofo's getting 1350rms each from my Earthquake PHD5000 @ 2 ohms in the custom box i made did i do a good job.. or should it be louder for about $1200-$1300 in stuff.. i mean the subs.. i thought were garbage but they are doing this daily... i was listening to Mike Jones - Pourin Up when i got it tested, then i tryed From cashville to texas - mike jones but i didnt hit higher but just about, i need to tweak settings a bit more and go back to get it tested again :-p
the meter was on the dash board as far us as it could go, i tryed a a few test tones to but didnt record waht those were hitting at, for the most part i was testing songs that use bass lines like what i basically listen to so i know what it is hitting when i am listening to it. :-p but is that good or no?
the score is legit, he tested it 2 times i tryed it at lower freq and it is just about as loud until i hit around 25hz or lower but when i over power then more then 1300rms~ each at the lower freq. i get the "popcorn" effect lol so i didnt turn the amp to high during the tests(i mean turn the HU volume up) just to my daily driving level
its not prefab boxes no more i never updated my profile, but if you read the forum alot u would have seen that i posted pictures of the box i built, Its about 2.5cu X2 box tuned to i believe 40Hz the box is a giant i dont no what a TL is? or AC mic? it was just some box he had with a mic and the it had a bunch or red led's that made the number but again, it was on the dash
haha well wtf, if im not really hitting 149.6 i want to go get my money back for the bs test and YES i am getting a TRUE 2700rms~ to the subs i have metered it all and everything, 200A alt, 1 yellow top, 1 redtop, and 0gauge, 8guage speaker wire, and such.
yea, 1 yellow and 1 red aint no where near enuff power to power a amp to produce 5krms... yea it turns the amp light on and plays.. but clamp it and tell me if it puts out anything near 5krms with ur 200a alt and 1 yellow and 1 red... lol
u should also ask for a refund... a Term LAB mice (TL) is mounted on the windsheild and uses a ethernet plug to connect the mic to the termlab unit, which is then connected to the computer through a usb port... with the software running! it is the only acurate way to measure pressure!