im building my first 3 sub-box (housing 3 10" ID's) i have all the dimentions and everything worked out fine, but my question is this.
since i have 3 seperate chambers for the subs, how should i do the wiring? is it ok to cut a small hole in the walls seperating each chamber and run the wires inside and have one speaker terminal out to the amp, OR should i have 1 speaker terminal for each chamber and wire everything on the outside? im just unsure if cutting a hole in between each chamber will mess w/ the volume or if it wont make a difference. let me know if you know! thanks
^^ .. drill a big enough hole to slide the wire through.. make sure you have enough to work with then caulk the hole shut. Let it dry before you start pulling on those wires.
