Adding Amp, Box, Sub to RX8 factory BOSE system

 

Bronze Member
Username: Paulmasoner

Honolulu, Hawaii Usa

Post Number: 12
Registered: Oct-06
I have a '06 RX8 with the factory Bose system. I am going to use the custom box that Zenclosures makes for the car( can be found on ebay motors). I want one 12", thinking about kappa perfect, alpine X, or digital dynamics. Dont know about amp, partly cause of this: I read that due to the kind of signal coming from the HU you have to use a Line output converter if you want to tap in before the bose amp (cant tap in after the bose amp cause its heavily EQ'd) I've also heard that with the right amp/inputs you dont have to do this LOC.. yet others still say ppl have fried their HU's not using one??

any advice, explanations, help
 

Gold Member
Username: Drivingreckless

Near tampa, Florida United state...

Post Number: 2019
Registered: Apr-06
get an LOC<-----is gunna carry the signal to ur amp
thts my advice
also wuts ur budget
 

Bronze Member
Username: Paulmasoner

Honolulu, Hawaii Usa

Post Number: 14
Registered: Oct-06
not for sure, but i can prolly go to around 800-1000 total, including box(200) sub, amp, LOC wiring etc
 

Gold Member
Username: Drivingreckless

Near tampa, Florida United state...

Post Number: 2023
Registered: Apr-06
www.ficaraudio.com
look at the Q series
also get dual one ohm i can sell u my amp for 225 shipped
a jbl gto1201.1
look aat my amp on this site www.jbl.com

or if not look at amps such as JL, soundstream, mmats, us amps, massive, RF power series
 

Silver Member
Username: Tweeker

RE AUDIO

Post Number: 539
Registered: May-06
drivingreckless get on aim or the jdes....chat bout the amp
 

Gold Member
Username: Drivingreckless

Near tampa, Florida United state...

Post Number: 2024
Registered: Apr-06
iight
im gettin on JD tweak
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us