Usa-200 Help

 

Bronze Member
Username: Yeah_toast

BIG SB South Bend, IN USA

Post Number: 38
Registered: May-05
Alright guys I need help. My friend has a Usa-200 amp its the old school model. Its teal in color and I can't find anything about it. I would like to know if its bridgeble and what ohm load its stable down to? Any ifno is greatly appreciated.
 

Gold Member
Username: Tjmutlow

Post Number: 3015
Registered: Sep-05
USA-200 and USA-200X
Two Channel Class AB Amplifier
Total Power Output: 200 Watts RMS
THD at Rated Power: <0.006%
Stereo Separation: >98dB
Signal/Noise Ratio: 100dBA
Frequency Response: 5Hz-50KHz
Fuse Rating: 25 Amps
Dimensions: (Including Terminals)

62mm / 2.44in High
229mm / 9.0in Wide
213mm / 8.375in Long

Weight: 2.27kg / 5.0lb
Switchable 2-Way Active Crossover with Preamp Output




USA-200 Only
One Ohm Stable
25 Watts x 2 into 4 Ohms
33 Watts x 2 into 3 Ohms
50 Watts x 2 into 2 Ohms
100 Watts x 2 into 1 Ohms
100 Watts Bridged into 4 Ohms
132 Watts Bridged into 3 Ohms
200 Watts Bridged into 2 Ohms
Available in Black or Chrome


USA-200X Only
Two Ohm Stable
50 Watts x 2 into 4 Ohms
66 Watts x 2 into 3 Ohms
100 Watts x 2 into 2 Ohms
200 Watts Bridged into 4 Ohms
Available in Black or Chrome
 

Bronze Member
Username: Yeah_toast

BIG SB South Bend, IN USA

Post Number: 39
Registered: May-05
It looks like this http://ampguts.realmofexcursion.com/USAmps_USA-400_(1st_ed)/
except its a 200.
 

Bronze Member
Username: Yeah_toast

BIG SB South Bend, IN USA

Post Number: 40
Registered: May-05
Copy and paste that sorry.
 

Bronze Member
Username: Yeah_toast

BIG SB South Bend, IN USA

Post Number: 41
Registered: May-05
Bump, Anyone. . . . . ?
 

Gold Member
Username: Tjmutlow

Post Number: 3042
Registered: Sep-05
call us amps, but they prob ar going to give you the specs i gave you above. prob all they changed was outer casing on amp for new year model.
 

Bronze Member
Username: Yeah_toast

BIG SB South Bend, IN USA

Post Number: 42
Registered: May-05
I'll do that. He wants to bridge it but sense the wires are pre-ran we don't know how to bridge it thats all. Thanks.
 

Silver Member
Username: Renegadesrun

Lafayette, IN US

Post Number: 447
Registered: Oct-04
http://www.usamps.com/old_site/technical/documentation.htm
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us