Quick Question on subs

Matt Rendas Bronze Member Username: Mrendas Florida Post Number: 32 Registered: Sep-06	Posted on Tuesday, September 26, 2006 - 19:33 GMT If i put two subs together and each has 400RMS would the amp have to be 800RMS?
Logan Gold Member Username: Logan__tille Hamilton, Indiana United states Post Number: 1198 Registered: Feb-06	Posted on Tuesday, September 26, 2006 - 19:47 GMT if you want to Power it corectly.
Isaac Gold Member Username: Carguy Post Number: 5662 Registered: Nov-04	Posted on Tuesday, September 26, 2006 - 20:03 GMT Don't forget, when you wire 2 subs in parallel, the resistance drops by half. In series it adds. Therefore you will need 800w amp that will meed the wiring configuration.
Matt Rendas Bronze Member Username: Mrendas Florida Post Number: 33 Registered: Sep-06	Posted on Tuesday, September 26, 2006 - 20:38 GMT What would be a better amp for 2 Diamond D312d2? Hifonics BXi 1206D Kenwood KAC-9102D Phoenix Gold R15.0:1
James Longo Gold Member Username: James1115 Ct Post Number: 6650 Registered: Dec-04	Posted on Tuesday, September 26, 2006 - 20:44 GMT PG
Matt Rendas Bronze Member Username: Mrendas Florida Post Number: 34 Registered: Sep-06	Posted on Tuesday, September 26, 2006 - 20:50 GMT Should i run it at 1000RMS(2ohm)or 500RMS(4ohm)?
adam Silver Member Username: Hockeyknight Post Number: 314 Registered: Apr-06	Posted on Tuesday, September 26, 2006 - 20:52 GMT 1000 rms @ 2ohms just make sure you set ur gains right
Matt Rendas Bronze Member Username: Mrendas Florida Post Number: 35 Registered: Sep-06	Posted on Tuesday, September 26, 2006 - 20:57 GMT How would this setup sound? Would it have more SP then SQ?
adam Silver Member Username: Hockeyknight Post Number: 315 Registered: Apr-06	Posted on Tuesday, September 26, 2006 - 21:26 GMT sry idk much about the diamond subs

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us