I'm going to have two P2002's. I have 2 4ohm's subs handling 225 watts each. I wanted to run both amps, each one bridged, so i get 200watts per subwoofer.
Will the following work for maximum power: 4awg from battery to Amp1 4awg from Amp1 to ground Remote wire from head unit to Amp1 RCA's to Amp1 Finally, will sending an RCA from Amp1 to Amp2 finish everything?
if your only using 200 rms per ampu can run a 4 guage wire to a distrobution block, and run a 8 guage wire to each amp and use the rca to connect the amps if they have rca output. and also im prety sure you need to run the remote wire to each amp...but u may not need to