|
Bronze Member Username: Jryan781Post Number: 19 Registered: Nov-05 | i recently posted a question about my amp not working (https://www.ecoustics.com/electronics/forum/car-audio/268696.html) come to find out the fuse on the power wire going to the amp had blown....didnt look like it had blown, but had it tested with a multi-meter and it was bad. it was a 60 amp fuse on my 4 gauge wire. what would cause that fuse to blow? i know too much power causes them to blow, but why and what would cause too much power to be goin through the wire? |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 8967 Registered: Jul-05 | did u make any changes to ur system?? without removing the neg battery terminal.?? |
|
Bronze Member Username: Jryan781Post Number: 20 Registered: Nov-05 | wasnt making any changes when the fuse went bad....just had the music up loud |
|
Gold Member Username: Thomas_gNM Post Number: 1812 Registered: Oct-05 | mine did too but i think its cuz a couple of wires touched accidentlly |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 2328 Registered: Dec-05 | just get a bigger fuse... i had a fuse box and the sht melted like cheese... then i changed it for a 150A fuse and is fine |