Help with Kole Amp

Ryan Pauls Bronze Member Username: Baalz159 South Plainfield, New Jersey USA Post Number: 22 Registered: Aug-06	Posted on Sunday, September 10, 2006 - 13:40 GMT Just started hooking up my new 2000W Kole amp, and whenever there is power going to it the Red Protect light is on. What could be the problem(s)? Thanks in Advance Ryan
ty mutlow Gold Member Username: Tjmutlow Post Number: 2780 Registered: Sep-05	Posted on Sunday, September 10, 2006 - 14:21 GMT power supply may be blown if it does it as soon as power is applied, and if it does it with no subs hooked on it.
Ryan Pauls Bronze Member Username: Baalz159 South Plainfield, New Jersey USA Post Number: 23 Registered: Aug-06	Posted on Sunday, September 10, 2006 - 14:32 GMT There are no Subs hooked up to it right now. What do you mean by power supply?
juliob Gold Member Username: Juliob Santo DomingoDominican Re... Post Number: 2234 Registered: Dec-05	Posted on Sunday, September 10, 2006 - 14:40 GMT open your amp
ty mutlow Gold Member Username: Tjmutlow Post Number: 2786 Registered: Sep-05	Posted on Monday, September 11, 2006 - 00:32 GMT if all the wires are correct(ground etc0 and it still does it, then that amp is fried....
Showrides Silver Member Username: Showrides Hartford, CT USA Post Number: 352 Registered: Feb-06	Posted on Monday, September 11, 2006 - 01:14 GMT The protection circuit will go on if the amp load is to low. Wire it correctly to a sub and see what happens. Hopefully you didn't ground and speaker wire coming out of it.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us