Tools

 

Bronze Member
Username: Jeffkock

Post Number: 79
Registered: Aug-06
What and how big of table saw should i get i want to start making boxs'.
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 3324
Registered: Oct-05
do you have acess to any other kind of saws? radial arm saw etc?

you need a skill saw for cuttin the wood. you can get them at home depot or lowe's. its called a skill saw too. heres the pic:

Upload

and then you need a jigsaw for cutting the sub cut-outs:


Upload
 

Bronze Member
Username: Bobimpact

Danbury, CT US

Post Number: 94
Registered: May-06
My shop uses a Delta 10'' table saw built into a larger table. You will probably want a larger table if you're going to be cutting large pieces of wood. For cutting holes we use a DeWalt 2 HP plunge router . You'll thank yourself for using the router if you're going to make a large number of boxes, or produce a bunch of the same type. Also, we use either an air drill or an 18 volt for holesaws (terminal cups).
 

Bronze Member
Username: Jeffkock

Post Number: 80
Registered: Aug-06
I have a jig saw. If I had just a skill saw would that be fine or would I need more?
 

Silver Member
Username: Crayola0

Wisconsin

Post Number: 752
Registered: Jun-06
u would need a jigsaw or sumthin to cut out the hole for the sub...prolly could find some cheap or borrow from a friend or neighbor.
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 3345
Registered: Oct-05
he already has the jig saw, so the last peice is a skill saw like in the pic. they are not expensive either. and that is what you use to make all the long cuts.

do you have any BIG saws?
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 3346
Registered: Oct-05
he already has the jig saw, so the last peice is a skill saw like in the pic. they are not expensive either. and that is what you use to make all the long cuts.

do you have any BIG saws? like used for big peices or anything?
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 3347
Registered: Oct-05
like table saw or radial arm saw to make the cuts square?

u have aim? i'm bassmanthree
 

Bronze Member
Username: Jeffkock

Post Number: 82
Registered: Aug-06
Right now I only have a jig saw I want to buy what I need and yes its BigPappaBrad2.
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 3354
Registered: Oct-05
k. get on right now
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us