Slot port ?'s

 

Silver Member
Username: Crayola0

Wisconsin

Post Number: 712
Registered: Jun-06
If say u have a slot port box and it has to be 20in long could u make a slot port on each side that would be 10 in long.
 

Silver Member
Username: Crayola0

Wisconsin

Post Number: 713
Registered: Jun-06
any one know if this will work?
 

Silver Member
Username: Drsmith

Montana USA

Post Number: 312
Registered: Nov-04
bump
 

Silver Member
Username: Hockeyknight

Post Number: 232
Registered: Apr-06
i wanna know too
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 3310
Registered: Oct-05
i'm not understanding what you are tryin to say. are you talkin bout the port length as 20? draw a quick pic
 

Silver Member
Username: Frkkevin

Lake Worth, Texas US

Post Number: 563
Registered: Nov-05
no.. lets say you have a port 5 inches wide and 7.3 inches long.. if you made it two ports both 5 inches wide the length would go to 20.5 inches.. more port area means the port will be longer.. now lets say you wanted the same port area but with two ports.. cut the width of the port down to 2 inches and then they would be 7.3 inches long so basically.. if you wanted to make two ports you would have to cut the width of that single port by 2 (in some cases more depending on the box) when you divide the port length in half

... i think lol :-) someone correct me if im wrong though
 

Gold Member
Username: Basshead86

Google is your Friend, FL

Post Number: 5256
Registered: Aug-05
you are right.:-)

if you had a port that had say 25sq.in. or port area and need to be 20in. long...

you would make 2 ports each with roughly 12.5sq.in. of port area and make each 10in. long.:-)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us