Like

Amp question

 

New member
Username: Bigbobbyhoward

Post Number: 9
Registered: Jul-06
Would I be able to hook up a switch to the remote wire of an amp and cut the amp on and off as pleased?
 

Silver Member
Username: Showrides

Hartford, CT USA

Post Number: 199
Registered: Feb-06
Yes, you can. Just install a switch in the line and install it wherever you feel appropriate.
 

New member
Username: Bigbobbyhoward

Post Number: 10
Registered: Jul-06
What if I have two amps hooked up. Would I be able to cut one on and off without affecting the other?
 

Silver Member
Username: Showrides

Hartford, CT USA

Post Number: 256
Registered: Feb-06
Well if you have 2 remote wires. Then you can put each on a seperate switch. But if you linkes the remote wires toether, and ran a single wire up front, then you can't turn them off individually.
 

Bronze Member
Username: Bigbobbyhoward

Post Number: 11
Registered: Jul-06
So just run one remote wire to the radio, and then another one to whatever and just cut the one that's hooked up to whatever on and off at will? Or would I be able to run both wires to the radio and just switch one wire, or will that cut both of them off?
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us