|
Bronze Member Username: EkulPost Number: 23 Registered: Jul-06 | crutchfield recommends sealed box volume: 0.57-1.00 cu. ft. so should i got with 1? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 8788 Registered: Jul-05 | i got my spec sheet here & gross rec sealed = .7-1 cuft sealed optimum gross internal vol = .85cuft ...... |
|
Bronze Member Username: EkulPost Number: 24 Registered: Jul-06 | not sure what gross rec means cuz ima noob at this stuff but i entered .85 into here http://www.carstereo.com/help/Articles.cfm?id=5 6.82 depth, 18.41 H, and 11.37 W so those are the measurements i use? ty |
|
Gold Member Username: RovinTrinidad & T... Post Number: 8791 Registered: Jul-05 | i never tried my R sealed b4 but done a few ported boxes 4 it use this instead cause it will tell u exact dimentions including the 3/4" wood/mdf http://www.the12volt.com/caraudio/boxcalcs.asp |
|
Bronze Member Username: EkulPost Number: 25 Registered: Jul-06 | ok i think i've got the measurements, 13 x 13 x 13.25 thanks |
|
Gold Member Username: RovinTrinidad & T... Post Number: 8798 Registered: Jul-05 | WAIT !^^^^^^^^^^ on quite a few sites i read they rec u should NEVER build a box where 2 sides r = or almost = , short explanation is something called "standing waves" & they rec ur dimentions should be odd 2 each other like 12x14x16 . Pefect or almost perfect cubed boxes r a total NO NO ....... |
|
Gold Member Username: RovinTrinidad & T... Post Number: 8799 Registered: Jul-05 | damn post wont bump...... |
|
Gold Member Username: RovinTrinidad & T... Post Number: 8802 Registered: Jul-05 | WTF ! -some1 please post here so this sh!t will bump so that the guy will see it ....... |
|
Silver Member Username: Aman2005Post Number: 279 Registered: May-06 | ha ha ha ha Ok ROvin??? |