|
Silver Member Username: Cplaya280Quakertown, PA USA Post Number: 245 Registered: Oct-05 | If i get 2 12" l7s and put them in 1 ported box together which version subs should i get to make it louder the dual 2 or dual 4, This is for 2 12" l7s |
|
Gold Member Username: Alias747MN Post Number: 1145 Registered: Apr-05 | Neither will get louder. They are the exact same sub except for the resistance of the voice coils. You need to pick which one you need depending on what amp you have or plan to use. The DVC 2 ohm can be wired to 2 ohms or .5 ohms. The DVC 4 ohm can be wired to 4 ohms or 1 ohms. Buy your amp accordingly. |
|
Gold Member Username: IlluminatorUSA Post Number: 3699 Registered: Apr-05 | Isn't it: 2ohm DVC can be wired to 4 ohms or 1 ohms? 4ohm DVC can be wired to 8 ohms or 2 ohms? |
|
Silver Member Username: Van_manBoston South, MA Post Number: 783 Registered: Mar-06 | Chris is wiring 2 subs, So Isaac is right for 2 subs, Jex is right for 1 sub. So, Your both right. |
|
Silver Member Username: Cplaya280Quakertown, PA USA Post Number: 247 Registered: Oct-05 | Ok well i have the Kicker zx1000.1 amp which is benched at like around 1200 so the amp is 2 ohm stable. How would u wire the 2 subs tho. like would i have to wire each sub to its own resistor or can i bridge both subs together onto one resistor. I wanna make sure i dont blow the amp or sub so does it matter how i do it |
|
Gold Member Username: RovinTrinidad & T... Post Number: 8656 Registered: Jul-05 | http://www.the12volt.com/caraudio/woofer_configurations.asp |