Box Divider help

 

Bronze Member
Username: Blazerboy

Post Number: 91
Registered: Jun-06
I am going to build a box for 2 12" rf punch stage 1 subs. I was thinking 33x15x15, what do you think about those dimensions? It is a sealed box.
Another question I have is should I put a divider inbetween the two subs in the box? My friend said I should so the two subs arent competing with eachother or something like that but he has a 10" sub and a 12" subs so I dont know if that would still be the right thing to do. Thanks for your help.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 8633
Registered: Jul-05
from RF site they rec 0.85cuft 4 sealed - u could safely go 1 cuft

use this http://www.the12volt.com/caraudio/boxcalcs.asp

yes i would rec a box divider ......
 

Silver Member
Username: John_wash

Nashville, Tennessee

Post Number: 390
Registered: Dec-05
yea u should put a divider inbetween the subs and i think that box will do just fine.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 8637
Registered: Jul-05
33 x 15 x 15 works up as 3.32cuft .........
 

Bronze Member
Username: Blazerboy

Post Number: 92
Registered: Jun-06
do you think that is too much? What dimensions do you recomend? I mainly want SQ.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 8644
Registered: Jul-05
when in doubt follow the manufacturer's recommendation

since u want SQ i would go 1 cuft /sub ...
 

Bronze Member
Username: Blazerboy

Post Number: 93
Registered: Jun-06
needless to say i am new in car audio, do you think you could help me figure some dimensons out. steven norris recomended 33x15x15. What you guys think?
 

Silver Member
Username: John_wash

Nashville, Tennessee

Post Number: 391
Registered: Dec-05
go 30x15x12. After divider and sub displacement u should be around 1 cuft/sub. Hope this helps u.
 

Bronze Member
Username: Blazerboy

Post Number: 94
Registered: Jun-06
Thanks, Any other opinions?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us