Custom box builder wanted

 

New member
Username: Clem07

Hardin, Texas US

Post Number: 1
Registered: Jun-06
I have a 1996 extended cab chevy pickup, and i am wondering if there is anyone out there or if it is even possible to build a box to house dual 10's. But....the catch is that i would like an extra hole cut in center between the two 10's to fit a single 10" Solo-Baric! Is this at all possible? Please let me know!(ksc2007_7_22_88@yahoo.com)
 

Silver Member
Username: Stnorris

Eldridge, IA US

Post Number: 408
Registered: Apr-06
ya its possible to do, i just dont know if its worth it off this site, because shipping could be around 60-70 dollars, that will be a little more than you could make the box for.
 

Gold Member
Username: Redliner

Wilmington, Ma

Post Number: 2010
Registered: Jun-05
why would u want to do that its going to sound horrible unless done correctly and u wont be doig it correctly trust me
 

Gold Member
Username: Sploosh56

Ohio

Post Number: 1354
Registered: May-04
http://www.freewebs.com/wahlsboxes/
 

Gold Member
Username: Southernrebel

Monroe, Louisiana USA

Post Number: 3031
Registered: Mar-04
kelby...

i would not build a box like that...just try 2 10's.

i have an ext cab silverado (1998) and i have been thru alot of boxes. The largest box i could get under my back seat was ~1.8cuft (gross)vented box tuned to 35hz (~1.5cuft net)...i had 1 10" adire brahma in this box.

it is hard to get alot of bass from that truck w/ a box under the seat...your best bet would really be a sealed downfire box w/ either 2 10's or 2 12's.
 

Gold Member
Username: Southernrebel

Monroe, Louisiana USA

Post Number: 3032
Registered: Mar-04
this would be a pretty good choice for a box.

http://www.proboxrocks.com/chevy/88-98extendeddf.shtml
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us