|
New member Username: KrisackermannPost Number: 7 Registered: May-06 | ok soo i recently bought 2 alpine type R's and have one kenwood 1000watt amp...i have it bridged out to both...now to my question when i play a song itll have good bass for a lil then sound like it gettin quieter..the subs are dual 4 oams and i was thinkin mabye im overloading the amp wit just one bridged out...any ideas on what it could be.... |
|
Silver Member Username: StnorrisEldridge, IA US Post Number: 213 Registered: Apr-06 | if your subs are dual 4, and ur bridging them, then make sure that your amp is 1 ohm stable. If your amp is 1 ohm, stable, then your not overloading it. And is the amp 1000rms, or max?? and 1 or 2 channel? im not sure what amp your talking about, so post the specs or a link to the amp. |
|
New member Username: KrisackermannPost Number: 8 Registered: May-06 | its this amp http://www.justkenwood.co.uk/stock01/kac7252.asp |
|
Gold Member Username: JmloughreyFarmington, CT Post Number: 1562 Registered: Jul-04 | for that amp your best bet would be to wire each sub to 2 ohms on its own channel giving them each supposidly 250w RMS power. |
|
New member Username: KrisackermannPost Number: 10 Registered: May-06 | should i buy another of those amps and just bridge them each to a sub or is there any other amps that would sound better for it...im kinda new at all this soo i dont know.... |
|
Silver Member Username: Van_manBoston, MA Post Number: 458 Registered: Mar-06 | Audio Section .......KAC-7252 Max Power Output .......1000 W Normal (4 ohm;) (20 Hz -- 20 kHz, 0.08 % THD)170 W × 2 Normal (4 ohm;) (DIN 45324 , +B = 14.4V) 170 W × 2 Normal(2 ohm;) (1 kHz, 0.8 % THD).250 W × 2 230 W Bridged (4 ohm;) (1 kHz, 0.8 %thd) 500 W × 1 |