Precautions!!!
|
Bronze Member Username: Aman2005Post Number: 100 Registered: May-06 | Hello Buddies, After getting an amp for my type R I am planning to install them meyself. I want to know that precautiions should be taken into avccount before and after installing the amp and subs so the both wont get blown? Your suggestions will be appreciated. Thanx froma newbie in advance |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 378 Registered: May-06 | make sure there is no paint for the ground to hit, make sure your + and - match up. don't let your power touch yoru ground. make sure your amp wont send a clipped signal to your subs. make sure the box meets spects, if it doesn't make sure you know what yoru doing first |
|
Silver Member Username: Thomas_gNM Post Number: 976 Registered: Oct-05 | Make sure u disconnect ur neg from ur battery b4 any installation. |
|
Silver Member Username: DrivingrecklessNear tampa, Florida United state... Post Number: 598 Registered: Apr-06 | MAKE SURE U RUN THE POWER WIRE THRU THE FIREWALL ON THE PART WERE THERE IS A BLACK RUBBER...DONT LET THE BARE POWER WIRE MAKE NE CONTACT WITH TH ECARS CHASSI.....ALSO EVERYTHING SHAINE SED...AND MAKE SURE TO SEAL UR BOX...AND JUMP UP AND DOWN WEN ITS FINISHED CUZ U JUST INSTALLED UR FIRST SYSTEM  |
|
Silver Member Username: Thomas_gNM Post Number: 977 Registered: Oct-05 | lol, crackbaby^^^ |
|
Bronze Member Username: LicidBrunswick, Ohio USA Post Number: 53 Registered: Dec-05 | All that above, and here is a link to some illustrated guides that should help you out as well. http://www.crutchfieldadvisor.com/S-3RcKJsu9KsV/reviews/installationguide/ |
|
Silver Member Username: Aman2005Post Number: 103 Registered: May-06 | Thanx, how to check whether is amp sending the clipped signals to subs? do the box specs disturb the working of the subs and can it lead them to blow? |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 380 Registered: May-06 | hey drivingreckless, i can sew you for copyright, your not suposed to take words from my dictionary with out letting me know.... "SED" is so in my dishonary.... LOL... YOU HAVE TO JUMP UP AND DOWN ITS A WELL KNOWN FACT... TJ... you haven't lived life yet LOL!!!! |
|
Silver Member Username: DrivingrecklessNear tampa, Florida United state... Post Number: 602 Registered: Apr-06 | oh i took it from ur dictionary annd used it in a sntence so u should be proud of me.clipped signals are wen the amplifier keeps up with the demand and trys to draw current thts not there so instead of a smooth flow of current u have pieces missing and this can be hazardous to ur subs......boxes: ported- tuned high(35-45)=loud tunned low(28-35)=sq and deep bass sealed-sound quality TJ want sum crack |
|
Silver Member Username: AdddisorderWest palm, Florida Post Number: 311 Registered: Jan-06 | just dont set your gains to high otherwise it will send out clipped signal. set them to the voltage of your HU pre outs. |
|
Silver Member Username: TweekerPost Number: 124 Registered: May-06 | yeah and cut the speker wires with a knife or something cause last time i used my mouth and got a big shock lol |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 408 Registered: May-06 | ^^^LOL^^^ SMART ONE OVER THERE^^^ |
|
Silver Member Username: TweekerPost Number: 126 Registered: May-06 | hey im not the only one who did this in the forum LOL |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 411 Registered: May-06 | HAHAHAHAHA!!! |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics