Kicker 1200
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 53 Registered: May-06 | would a kx 1200.1 push a kicker 15 L7 and be very loud???????????? |
|
New member Username: Focus_zx3Post Number: 7 Registered: May-06 | yes |
|
Gold Member Username: B101Queen City, NC USA Post Number: 3021 Registered: Sep-05 | NO, not very loud... GET a 5000 rms amplifer for it... |
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 65 Registered: May-06 | walla go u said get the kicker 1200 amp for itwhy u sayin 5000 rms ????????????????? |
|
Gold Member Username: B101Queen City, NC USA Post Number: 3028 Registered: Sep-05 | cause u where acting like 1200D is a little bitty bit of power!! 1200D can still blow that sub to be honest! ITS ALOT! |
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 67 Registered: May-06 | k....would it make it any louder than if i put it in my escalade than my truck my truck is gmc sierra 2x2 extended cab or wuld it just make the bass deepper if i put it in my escalade? which would sound better |
|
Silver Member Username: Nnnnick_bWeddington, Nc Usa Post Number: 757 Registered: Jan-05 | Look Tyler. The amp doesnt matter as much as you think it does. You wont be able to tell the difference between 1000rms and 1200rms. Doubling the wattage in a system will only give around a 3 db rise.(10 db is audibly doubling the noise) I order to double the noise you must multiply your power by 10. 10,000 watts will yeild twice the audilble noise as 1000 watts with the same subwoofer. What makes the difference is the install. A L5 and 500rms proffesionally installed will bump harder then an L7 with 1000 watts in a crapp y install. By an amp based on your budget, the subs RMS and reliability. Personally I think you would be happy giving that L7 1000rms. |
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 69 Registered: May-06 | so would the kicker 1200 amp work out really well and sound great and loud? |
|
Silver Member Username: Nnnnick_bWeddington, Nc Usa Post Number: 759 Registered: Jan-05 | yes, it would be plenty loud. |
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 70 Registered: May-06 | how would u hook it up would u just hook it up and it would run on 2 ohm since the sub is an 2 ohm sub or how does that work? or do u haft to bridge it to make it put out 1200 rms watts |
|
Silver Member Username: DrivingrecklessNear tampa, Florida United state... Post Number: 573 Registered: Apr-06 | IS UR SUB A SINGLE 2 OHM SUB OR IS IT DUAL VOICE COIL SUB 2 OHMS PER VOICE COIL???? |
|
Silver Member Username: Nnnnick_bWeddington, Nc Usa Post Number: 760 Registered: Jan-05 | I'm pretty sure its dual 2 ohm. |
|
Silver Member Username: DrivingrecklessNear tampa, Florida United state... Post Number: 574 Registered: Apr-06 | THE ONLY WAY YOU CAN WIRE THEM ARE TO 1 OHM OR 4 OHM.....THNX NICK |
|
Silver Member Username: Nnnnick_bWeddington, Nc Usa Post Number: 762 Registered: Jan-05 | but i'm not possitive. The 1200.1 runs at 1 ohm right? The 600.1s run at 2 ohms. as do the 400.1s |
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 71 Registered: May-06 | yea my sub is a dual 2 ohm so when i hooked in my up would it make it a 1 ohm and push 1200 to the sub or would it stay at 2 ohm and push only 600 |
|
Silver Member Username: Nnnnick_bWeddington, Nc Usa Post Number: 767 Registered: Jan-05 | If it is dual two ohm, then wiring in parallel would yield a 1 ohm load and wiring in series would yield a 4 ohm load. |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1387 Registered: Oct-05 | it would push 1200 if u wired it to 1 ohm... |
|
Silver Member Username: Matt12490Benicia, California USA Post Number: 979 Registered: May-05 | 3db increase is twice as loud, not 10db... |
|
Gold Member Username: Safe_crackerChicago, IL US Post Number: 1160 Registered: Jan-06 | The Kicker sx and kx series are the only 1 ohm stable in Kicker's line. Interior size also plays a huge role in weather or not it will be loud, may even sound louder outside, lol. Polo.  |
|
Silver Member Username: Nnnnick_bWeddington, Nc Usa Post Number: 770 Registered: Jan-05 | No, 3 db's require doulble the amplifier power. 10db's is a doubling of audible noise. Not all the kx's are one ohm stable. The 600.1 and 400.1 are only 2 ohms stable. |
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 74 Registered: May-06 | im puttin the sub in my escalade and im wantin to wire to 1 ohm if i do that will it be really loud and people can hear my bass from blocks to blocks? the sub box is ported |
|
Silver Member Username: Nnnnick_bWeddington, Nc Usa Post Number: 773 Registered: Jan-05 | You will get teh best results with a custom made ported enclosure tuned around 35 cycles. Not a prefab ported enclosure. The 1200.1 will give you plenty of power. Yes, you will be heard blocks away, but only with the right box. |
|
Bronze Member Username: Big_fletchNewport, Ar, Ar United states Post Number: 76 Registered: May-06 | have u heard of the probox for solo baric? click on this website and tell me if that would make a big difference im thinkin about gettin on of these boxes http://www.proboxrocks.com/superbass/115SQSPB.shtml |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics