i have a legacy blue diamond amp and its the 2400watt 2 channel i wanted to bridge it with 2 subs but when i do i blow 1 out of 2 fuses on the amp EVERYTIME WHATS WRON"???????!!!!!!!!!!! SHOULD I BU BIGGER AMOP FUSES IT CAME WITH 15AMP FUSES
Now think about this - I had a Zapco C2K 6.0X amp, which was 2x150W at 4ohm stereo and 1200Wx1 at 2ohm mono bridged and it had 3x30Amp fuses. So your 2400W monster has 2x15Amp fuses??? Must be very real watts OK, now down to business - 15amp fuses are prob to small for your diamond, you should find the amp's specs on line and see what size fuses it needs. Just don't go too big, it will fry the amp
put an ohm meter on the amp with the speakers hooked up, to verify it is a 4ohm load, but if those are dual 4, run it in stereo mode, 1 speaker per channel at 2ohm load, power is the same as bridged...
