|
Bronze Member Username: HunterjamesPost Number: 36 Registered: Feb-06 | How do I install 2 amps with 1 cap... I get confused with the ground?? |
|
Silver Member Username: DrivingrecklessNear tampa, Florida United state... Post Number: 538 Registered: Apr-06 | the ground should be bolted onto the chassi of the vehicle...make sure to scrape off all the paint were u are bolting the ground to for a good connection |
|
Gold Member Username: Young_jamesCanada Post Number: 1543 Registered: Sep-05 | ^^^word.......bolt to bare metal for best results |
|
Bronze Member Username: HunterjamesPost Number: 38 Registered: Feb-06 | Shouldn't the ground go through the cap like the how the first amp is set up? |
|
Bronze Member Username: HunterjamesPost Number: 39 Registered: Feb-06 | Shouldnt the ground go through the cap similar to the set up of the first amp? |
|
Bronze Member Username: HunterjamesPost Number: 40 Registered: Feb-06 | sorry about the double post ! |
|
Silver Member Username: DrivingrecklessNear tampa, Florida United state... Post Number: 539 Registered: Apr-06 | http://www.caraudiohelp.com/car_audio_capacitor_installation/car_audio_capacitor _installation.htm try this |
|
Silver Member Username: Racer501USA Post Number: 331 Registered: Jun-05 | idk what happens when you do this but my friend went and put his ground on the negative part of the battery is that a smart thing to be doing? |
|
Gold Member Username: B101Queen City, NC USA Post Number: 2904 Registered: Sep-05 | ground is ground, unless u have a floating ground or a Negative Ground... grounding at the negative part of the battery is the same point as grounding to the chassis of the car... Network Circuits... |