Just ordered audiobahn a8002t
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 91 Registered: Sep-05 | First anyone have any reviews on this amp? and second i have 2 dvc 4 ohm voice coils subs how should i wire them to get the 400x2 rms or 800x1 rms, wat would be easier on the amp the 400x2 or 800x1? |
|
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 856 Registered: Mar-04 | 400x2 at 2 and 800x1 at 4 is exactly the same to the amp. I'd probably go the bridged route --
|
|
|
Silver Member Username: Troy81Tavernier, Fl Us Post Number: 206 Registered: Mar-06 | did you really order it? im sorry, good luck on selling it after you find out how "nice" it is | |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1204 Registered: Oct-05 | ^^ u dont know what ur talkin about. its a fantastic budget amp that will never overheat and never go into protection if u have the gain set correctly. u will be extremely pleased with the power that amp puts out. and like optidriven said, just wire to a 4 ohm load, and bridge it. their should be "bridged" words above the terminals, and that where u hook the pos, and neg up. |
|
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 7123 Registered: Jul-05 | ^^^He doesnt relize a watt is a watt | |
|
Bronze Member Username: NorthomahaPost Number: 72 Registered: Mar-06 | i had that exact amp and it was a great starter amp, it rattled the mirrors and did everything i wanted it too, you cant beat its price either, so good pick but i wouldnt get any other audiobahn stuff because this is about the only audiobahn amp ive heard good things about | |
|
New member Username: Kevinba46Temple, GA Usa Post Number: 9 Registered: May-06 | i have 1 audiopipe tsv 10" and 1 12" of the same model and they are both dual voice coil 4 ohm subs what kind of amp should i get and how do i wire it? | |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1208 Registered: Oct-05 | chauncey- was that agreeing with me, or dissagreeing. because all i said was that it was a good budget amp...?? | |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 7125 Registered: Jul-05 | agreeing, if an amp puts out its rated power then it is a good amp After that u have 2 worry about quality, and if someone doubts me then take the test |
|
|
Silver Member Username: Troy81Tavernier, Fl Us Post Number: 209 Registered: Mar-06 | yeah, well, im not going to argue because i dont know anything about THAT audioburn amp, but pretty much everything audiobahn ive seen has been closer to sh!t than audio equipment | |
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 93 Registered: Sep-05 | well if you dint kno anything abotu the amp why did u respond??? | |
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 94 Registered: Sep-05 |
is that the way i wire them for 800x1 rms? if this is how i do it then can i just run the pos and negative of speaker 1 to bridge pos n neg, then from speaker 2 run the pos n neg straight to the amp or do i actually have to run it to speaker 1s pos n negative? |
|
|
Silver Member Username: Troy81Tavernier, Fl Us Post Number: 217 Registered: Mar-06 | because audiobahn is prbably the worst company out, and i will do as much as i can to put them under, though they can just lie to all the new people and get them to buy there sh!tty stuff, audiobahn straight up lies. thats it end of this g@y argument and i highly doubt that amp puts 800X1. if you have a bench test ill believe you, and id like to see the THD at 800 watts if can actually get that high | |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 7128 Registered: Jul-05 | damnit man, it has been benched alot of times..Just face it that amp buts out 800rms I dont like them as much as u do, but facts are facts |
|
|
Silver Member Username: Troy81Tavernier, Fl Us Post Number: 219 Registered: Mar-06 | whats the THD at 800 watts? prolly like 2.5% | |
|
Silver Member Username: JohammbassCork, Cork Ireland Post Number: 125 Registered: May-06 | Audiobahn will soon be available in Kroger so think for youself |
|
|
Silver Member Username: Troy81Tavernier, Fl Us Post Number: 226 Registered: Mar-06 | kroger? | |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 7137 Registered: Jul-05 | food store http://en.wikipedia.org/wiki/Kroger |
|
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1211 Registered: Oct-05 | rick:  |
|
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 95 Registered: Sep-05 | bassman i understand, what im asking is for speaker 2 (furthers to the right in photo) do i run the posative and negative to the amp or speaker 1s posative and negative, or dont it matter? | |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1213 Registered: Oct-05 | it dont matter. they just all need to touch or ur not completing the circuit. |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics