New member Username: 67stingray
Post Number: 1
Registered: May-06
|
Posted on I screwed up!! 2000 ranger. I created a elec short. Lost interior light;wipers and speedometer all at once. Where do I look? Thanks for any help. Don |
New member Username: Gleds
Edmonton,
Alberta
Canada
Post Number: 7
Registered: May-06
|
Posted on check all your fuses... under the hood, under the dash... failing that you may have fried a computer and you should head to dealership. |
Bronze Member Username: B_sharp
Post Number: 15
Registered: May-06
|
Posted on Remove +12v cable at battery.
DMM resistance continuity check Accessory wire at ignition key.
Should not be shorted to gnd even when key is turned.
|
Bronze Member Username: B_sharp
Post Number: 17
Registered: May-06
|
Posted on Next verify DMM resistance continuity check 'tween Accessory and constant +12v, at key is fine else at battery cable.
Next re-connect +12v battery cable.
Verify Accessory wire is 0 volts.
Turn ignition key to only first position.
Verify Accessory wire is +12 volts.
|